PETG Sheet, PETG, Grade Standard, Plastic Length 8 ft, Plastic Width 4 ft, Plastic Thickness 0.25 in, Colorless, Plastic Clarity Clear, Tensile Strength 7,700 psi, Impact Strength 1.2 ft-lb/in, Friction Coefficient 0.25, Water Absorption 0.2 Percent, Temperature Range -40 Degrees to 153 Degrees F, Plastic Density 1.27 g/cc, Plastic Hardness Rockwell R115
| Item | Sheet Stock |
|---|---|
| Plastic Material | PETG |
| Plastic Thickness | 1/4 in |
| Plastic Width | 48 in |
| Plastic Length | 96 in |
| Plastic Color | Clear |
| Max. Temp. (F) | 153 |
| Min. Temp. (F) | -40 Degrees F |
| Color | Colorless |
| Width Tolerance | +/-0.25 in |
| Operating Temp. Range | -40 to 153 deg F |
| Plastic Properties | Transparent |
| Plastic Grouping | Sheet Stock |
| Tensile Strength | 7,700 psi |
| Material Color Family | Clear |
| Thickness Tolerance | +/-10% |
| Material Type | Film Masked |
| Length Tolerance | +/-0.250 in |
| Thickness | 1/4 in |
| Material | PETG |
| Width | 48" |
| Length | 96" |
| Shape | Rectangle |
| Plastic Thickness Tolerance | +/-10% |
| UV Resistant | No |
| Plastic Hardness | Rockwell R115 |
| Impact Strength Rating | Poor |
| Impact Strength | 1.2 ft-lb/in |
| Machinability | 85 % |
| Tensile Strength Rating | Good |
| Plastic Length Tolerance | +/-1/4 in |
| Minimum Temperature | -40 deg F |
| Plastic Width Tolerance | +/-1/4 in |
| Friction Rating | Slippery |
| Corrosion and Chemical Resistance | Good |
| Wear Factor | Fair |
| Plastic Hardness Rating | Hard |
| Temperature Range | -40 to 153 deg F |
| Plastic Clarity | Clear |
| Water Absorption | 0.2% |
| Nominal Size | 48 in W x 96 in L |
| Water Absorption Rating | Good |
| Maximum Temperature | 185 deg F |
| Grade | Standard |
| Friction Coefficient | 0.25 |
| Backing Type | Not Applicable |
| Maximum Adhesive Temperature | 185 deg F |
| Standards | JL C3DP/10993-5:2009 |
| Minimum Adhesive Temperature | 122 deg F |
| Plastic Density | 1.27 g/cc |
| Flexural Modulus | 310,000 psi |
| Light Transmission | 86 % |
| Product Form | Sheet |
| Elongation | 15 % |
| Metal Detectable | No |
| Wear Rate | 1.96 x 10^-8 cu mm/N-m |
| Fabrication | Extruded |
| Rockwell Hardness | 115 HRR |
| Static-Resistant | Not Static-Resistant |
| Product Type | Plastic Sheet |
| Filler Material | Not Applicable |
| UV-Resistant | UV-Resistant |
| Coefficient of Thermal Expansion | 66.8 x 10^-6 m/m Degrees C |
| FDA Compliance | 21 CFR 177.1315 |
| Scratch-Resistant | Not Scratch-Resistant |
| Shore Hardness | 70 Shore D |
| Dielectric Strength | 410 V/mil |
| Number of Walls | Not Applicable |
| UL 752 Ballistic Rating | Not Applicable |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |