Polycarbonate Sheet, Polycarbonate, Grade Standard, Plastic Length 24 in, Plastic Width 12 in, Plastic Thickness 0.0625 in, Colorless, Plastic Clarity Clear, Tensile Strength 9,700 psi, Impact Strength 14 ft-lb/in, Friction Coefficient 0.53, Water Absorption 0.13 Percent, Temperature Range -40 Degrees to 240 Degrees F, Plastic Density 0.043 lb/cu in, Plastic Hardness Rockwell R120
| Item | Sheet Stock |
|---|---|
| Plastic Material | Polycarbonate |
| Plastic Thickness | 1/16 in |
| Plastic Width | 12 in |
| Plastic Length | 24 in |
| Plastic Color | Clear |
| Max. Temp. (F) | 240 |
| Min. Temp. (F) | -40 Degrees F |
| Color | Colorless |
| Thickness | 0.063 in |
| Metal Detectable | No |
| Material | Polycarbonate |
| Plastic Properties | Impact Resistant |
| Tensile Strength | 9,700 psi |
| Operating Temp. Range | -40 to 240 deg F |
| Standards | UL 94 V-2 |
| Length | 24" |
| Width | 12" |
| Corrosion and Chemical Resistance | Fair |
| Machinability | Not Rated |
| Water Absorption Rating | Good |
| Plastic Hardness | Rockwell R120 |
| Minimum Temperature | -40 deg F |
| Nominal Size | 12 in W x 24 in L |
| Friction Rating | Not Slippery |
| Plastic Hardness Rating | Hard |
| Wear Factor | Fair |
| Plastic Length Tolerance | +/-1 in |
| Plastic Thickness Tolerance | +0.007/-0.009 in |
| Impact Strength | 14 ft-lb/in |
| Temperature Range | -40 to 240 deg F |
| Water Absorption | 0.13% |
| Impact Strength Rating | Excellent |
| Backing Type | No Backing |
| UV Resistant | No |
| Tensile Strength Rating | Good |
| Plastic Width Tolerance | +/-1 in |
| Friction Coefficient | 0.53 |
| Plastic Density | 0.043 lb/cu in |
| Grade | Standard |
| Plastic Clarity | Clear |
| Shape | Rectangle |
| Maximum Temperature | 240 deg F |
| Minimum Adhesive Temperature | Not Applicable |
| Maximum Adhesive Temperature | Not Applicable |
| Light Transmission | 88 % |
| UV-Resistant | Not UV-Resistant |
| Elongation | Not Rated |
| Dielectric Strength | Not Rated |
| Product Form | Sheet |
| Product Type | Plastic Sheet |
| Rockwell Hardness | 120 HRR |
| Fabrication | Not Applicable |
| FDA Compliance | Not FDA Compliant |
| Coefficient of Thermal Expansion | 6.6 x 10^-5 K^-1 |
| Wear Rate | Not Rated |
| Scratch-Resistant | Not Scratch-Resistant |
| Filler Material | Not Applicable |
| Weight | 0.8 lb |
| Static-Resistant | Not Static-Resistant |
| Shore Hardness | 95 Shore D |
| UL 752 Ballistic Rating | Not Applicable |
| Flexural Modulus | 2,350 MPa |
| Number of Walls | Not Applicable |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |