Expansion Joint, Bolt Circle Diameter 3 1/8 in, Bolt Hole Size 1/2 In.-13, Bolt Hole Threading Threaded, Burst Pressure 853 psi, Compression Distance 1/2 in, Connection Type Flanged, Expansion Distance 3/8 in, Expansion Joint Type Single Bulb, Features Absorbs Pipe Movement and Stress, Flange Diameter 4 1/4 in, Flange Material Steel, Flange Material Finish Zinc-Plated, For Fluid Type Air, Gas, Hydraulic Fluid, Water, Joint Material Neoprene, Joint Material Finish Not Applicable
| Type | Single Sphere |
|---|---|
| Pipe Size | 1 in |
| Material | Neoprene |
| Outside Dia. | 4-1/4 in |
| Bolt Circle Dia. | 3.13 in |
| Connection | Drilled |
| Flange Thickness | 0.55 in |
| Overall Length | 6 in |
| Pipe Size (Fittings) | 1 in |
| Temp. Range | -50 to 230 Deg F |
| Item | Expansion Joint |
| Bolt Hole Size | 1/2" -13 |
| Max. Pressure | 225 psi @ 72 Degrees F |
| Vacuum | 26 In Hg At 72 Deg F |
| Bolt Holes | 4 |
| Standards | ANSI 125150 |
| Pipe Fitting Material | Neoprene |
| Pipe Size - Pipe Fitting | 1 in |
| Seal Material | Neoprene |
| Bolt Circle Diameter | 3-1/8 in |
| Minimum Operating Temperature | -50 deg F |
| Joint Material Grade | Not Applicable |
| Resistance Properties | Corrosion Resistant |
| Connection Type | Flanged |
| Reinforcement Material | Synthetic Fiber |
| Maximum Operating Temperature | 230 deg F |
| For Environment | HVAC, Industrial Piping, Marine Service, Petrochemical, Pollution Control, Power Generating, Pulp and Paper, Water and Wastewater |
| Offset Distance | 1/2 in |
| Number of Bolt Holes | 4 |
| Maximum Vacuum Pressure | 26 inHg @ 72 F |
| Burst Pressure | 853 psi |
| Travel | Not Applicable |
| For Fluid Type | Chemicals, Air, Gases |
| Flange Diameter | 4-1/4 in |
| Compression Distance | 1/2 in |
| For Use On | Pipe |
| Expansion Joint Type | Single Bulb |
| Flange Material Finish | Zinc-Plated |
| Features | Absorbs Pipe Movement and Stress |
| Joint Material Finish | Not Applicable |
| Outside Diameter | 4-1/4 in |
| Bolt Hole Threading | Threaded |
| Expansion Distance | 3/8 in |
| Flange Material | Steel |
| Joint Material | Neoprene |
| Maximum Off-Center Angle | 15 deg |
| Maximum Operating Pressure | 225 psi |
| Side A Thread Type | Not Applicable |
| Fitting Side A Gender | Not Applicable |
| Fitting Side B Type | Flange |
| Side B Thread Type | Not Applicable |
| Fitting Side B Gender | Not Applicable |
| Socket Material | Not Applicable |
| Wire Rope Length | 6 in |
| Length | 6 in |
| Fits Chest Size | Absorbs Pipe Movement and Stress |
| Country of Origin (subject to change) | Taiwan, Province of China |
| Package Quantity | 1 |