SAE Washer, Flat Washer Type SAE, Dimensional Standards ASME B18.21.1, Material Stainless Steel, Material Grade/Class 316 H5, Finish Plain, For Screw Size 5/16 in, Inside Diameter 0.344 in, Outside Diameter 11/16 in, Maximum Thickness 0.08 in, System of Measurement Inch, Minimum Thickness 0.051 in, Color Silver, Inside Diameter Tolerance +/-0.010 in, Material Quality Standards ASTM A276, Outside Diameter Tolerance +/-0.010 in, Pack Size Small Pack
| Item | Flat Washer |
|---|---|
| Material | 316 Stainless Steel |
| Finish | Plain |
| For Screw Size | 5/16" |
| Outside Diameter | 11/16 in |
| Minimum Thickness | 0.051 in |
| Maximum Thickness | 0.08 in |
| Standards | SAE Standard |
| System of Measurement | Inch |
| Inside Diameter | 0.344 in |
| Color | Silver |
| Application | General Purpose |
| Rockwell Hardness | C25 |
| Thickness Tolerance | -0.014 in/ + 0.005 in |
| Washer Material Grade | AMPG 316H5 |
| Brinell Hardness | 250 |
| Package Quantity | 1 |
| Type | SAE Flat Washer |
| Resistance Properties | Acid-Resistant, Alkaline-Resistant, Chloride-Resistant, Corrosion-Resistant, Solvent-Resistant, Salt Water-Resistant |
| Dimensional Standards | ASME B18.21.1 |
| Pack Size | Small Pack |
| Material Quality Standards | ASTM A276 |
| Tensile Strength | 125,000 psi |
| Outside Diameter Tolerance | +/-0.010 in |
| Inside Diameter Tolerance | +/-0.010 in |
| Material Grade/Class | 316 H5 |
| For Use With | Bolts, Nuts, Screws, Studs |
| Washer Length | Not Applicable |
| Slot Depth | Not Applicable |
| Dye Color | Not Applicable |
| Metal Detectable | Not Applicable |
| X-Ray Detectable | Not Applicable |
| Hardness | 25 HRC |
| Washer Width | Not Applicable |
| Washer Type | Regular Rim |
| FDA Approved | Not FDA Approved |
| Slot Width | Not Applicable |
| Shell Material | Stainless Steel |
| Wire Color | Silver |
| Country of Origin (subject to change) | United States |