Large O.D. Oversized Washer, Flat Washer Type Oversized, Dimensional Standards AMPG 2003 FIT-TIGHT.01, Material Steel, Material Grade/Class Case Hardened, Finish Black Oxide, For Screw Size 5/8 in, Inside Diameter 0.656 in, Outside Diameter 1 3/4 in, Maximum Thickness 0.166 in, System of Measurement Inch, Minimum Thickness 0.146 in, Color Black, Inside Diameter Tolerance +/-0.010 in, Material Quality Standards ASTM A108, Outside Diameter Tolerance +/-0.010 in, Pack Size Small Pack
| Item | Flat Washer |
|---|---|
| Material | Steel |
| Finish | Black Oxide |
| For Screw Size | 5/8" |
| Outside Diameter | 1-3/4 in |
| Minimum Thickness | 0.146 in |
| Maximum Thickness | 0.166 in |
| Standards | N/A |
| System of Measurement | Inch |
| Inside Diameter | 0.656 in |
| Thickness Tolerance | +0.005/-0.020 in |
| Washer Material Grade | Low Carbon |
| Package Quantity | 5 |
| Rockwell Hardness | B49 |
| Application | General Purpose |
| Color | Black |
| Type | Oversized Flat Washer |
| Dimensional Standards | AMPG 2003 FIT-TIGHT.01 |
| Inside Diameter Tolerance | +/-0.010 in |
| Material Grade/Class | Case Hardened |
| Outside Diameter Tolerance | +/-0.010 in |
| Pack Size | Small Pack |
| For Use With | Screws and Studs |
| Material Quality Standards | ASTM A108 |
| Hardness | 4 HRC |
| X-Ray Detectable | Not Applicable |
| Slot Depth | Not Applicable |
| Washer Length | Not Applicable |
| FDA Approved | Not FDA Approved |
| Washer Type | Large Outside Diameter |
| Washer Width | Not Applicable |
| Dye Color | Not Applicable |
| Metal Detectable | Not Applicable |
| Slot Width | Not Applicable |
| Shell Material | Steel |
| Wire Color | Black |
| Country of Origin (subject to change) | United States |