SAE Washer, Flat Washer Type SAE, Dimensional Standards ANSI B18.21.1, Material Stainless Steel, Material Grade/Class 316, Finish Plain, For Screw Size 7/16 in, Inside Diameter 0.469 in, Outside Diameter 59/64 in, Maximum Thickness 0.08 in, System of Measurement Inch, Minimum Thickness 0.051 in, Inside Diameter Tolerance +/-0.010 in, Material Quality Standards ASTM A276, Outside Diameter Tolerance +/-0.010 in, Pack Size Small Pack
| Item | Flat Washer |
|---|---|
| Material | 336 Stainless Steel |
| Finish | Plain |
| For Screw Size | 7/16" |
| Outside Diameter | 59/64 in |
| Minimum Thickness | 0.051 in |
| Maximum Thickness | 0.08 in |
| Standards | SAE Standard |
| System of Measurement | Inch |
| Inside Diameter | 0.469 in |
| Washer Material Grade | 316 |
| Package Quantity | 5 |
| Rockwell Hardness | B70 |
| Thickness Tolerance | -0.014 in/ +0.005 in |
| Application | Tight Fit Assembly |
| Type | SAE Flat Washer |
| Outside Diameter Tolerance | +/-0.010 in |
| Tensile Strength | 75,000 psi |
| Dimensional Standards | ANSI B18.21.1 |
| Pack Size | Small Pack |
| Material Quality Standards | ASTM A276 |
| Material Grade/Class | 316 |
| Resistance Properties | Acid-Resistant, Alkaline-Resistant, Chloride-Resistant, Corrosion-Resistant, Solvent-Resistant, Salt Water-Resistant |
| Inside Diameter Tolerance | +/-0.010 in |
| For Use With | Screws and Studs |
| Metal Detectable | Not Applicable |
| Slot Depth | Not Applicable |
| FDA Approved | Not FDA Approved |
| Hardness | 83 HRB |
| Dye Color | Not Applicable |
| X-Ray Detectable | Not Applicable |
| Washer Width | Not Applicable |
| Washer Type | Small OD |
| Washer Length | Not Applicable |
| Slot Width | Not Applicable |
| Shell Material | Stainless Steel |
| Country of Origin (subject to change) | United States |