Flat Washer, Flat Washer Type Standard, Dimensional Standards DIN 125, Material Stainless Steel, Material Grade/Class 316 H5, Finish Plain, For Screw Size M6, Inside Diameter 6.4 mm, Outside Diameter 12 mm, Maximum Thickness 1.8 mm, System of Measurement Metric, Minimum Thickness 1.4 mm, Color Silver, Inside Diameter Tolerance +/-0.010 in, Material Quality Standards ASTM A276, Outside Diameter Tolerance +/-0.010 in, Pack Size Small Pack
| Item | Flat Washer |
|---|---|
| Material | 316 Stainless Steel |
| Finish | Plain |
| For Screw Size | M6 |
| Outside Diameter | 12 mm |
| Minimum Thickness | 1.4 mm |
| Maximum Thickness | 1.8 mm |
| Standards | DIN 125 |
| System of Measurement | Metric |
| Inside Diameter | 6.4 mm |
| Thickness Tolerance | +/-0.20mm |
| Color | Silver |
| Washer Material Grade | AMPG 316H5 |
| Application | General Purpose |
| Brinell Hardness | 250 |
| Rockwell Hardness | C25 |
| Package Quantity | 1 |
| Type | Flat Washer |
| Material Grade/Class | 316 H5 |
| Outside Diameter Tolerance | +/-0.010 in |
| Inside Diameter Tolerance | +/-0.010 in |
| Tensile Strength | 125,000 psi |
| Resistance Properties | Acid-Resistant, Alkaline-Resistant, Chloride-Resistant, Corrosion-Resistant, Solvent-Resistant, Salt Water-Resistant |
| Dimensional Standards | DIN 125 |
| Pack Size | Small Pack |
| Material Quality Standards | ASTM A276 |
| For Use With | Bolts, Nuts, Screws, Studs |
| Washer Width | Not Applicable |
| Slot Depth | Not Applicable |
| Washer Type | Regular Rim |
| Slot Width | Not Applicable |
| Hardness | 25 HRC |
| Metal Detectable | Not Applicable |
| FDA Approved | Not FDA Approved |
| X-Ray Detectable | Not Applicable |
| Washer Length | Not Applicable |
| Dye Color | Not Applicable |
| Shell Material | Stainless Steel |
| Wire Color | Silver |
| Country of Origin (subject to change) | United States |