Foam Sheet, Material Polyethylene, Shape Sheet, Grade Standard, Length 24 in, Width 12 in, Thickness 1/2 in, Backing Type Plain, Cell Type Closed Cell, Adhesive Type Not Applicable, Number of Adhesive Sides 0, Color Yellow, Density 4 lb/cu ft, Maximum Temperature 225 Degrees F, Minimum Temperature -40 Degrees F, Maximum Adhesive Temperature Not Applicable, Minimum Adhesive Temperature Not Applicable, Tensile Strength 85 psi, Texture Smooth, Firmness @ 25 Percent Deflection 14 psi
| Item | Foam Sheet |
|---|---|
| Color | Yellow |
| Material | Polyethylene |
| Length | 24 in |
| Width | 12 in |
| Thickness | 1/2 in |
| Shape | Sheet |
| Cell Type | Closed Cell |
| Package Quantity | 1 |
| Cell Type - Foam | Crosslink |
| Standards | MVSS 302 |
| Type | Crosslink Foam |
| Finish | Smooth Cellular |
| Width Tolerance | +/- 0.125 in |
| Backing Type - Foam | Plain |
| Color - Foam | Yellow |
| Material - Foam | Polyethylene |
| Item - Foam | Foam Sheet |
| Length - Foam | 24 in |
| Length Tolerance | +/- 0.125 in |
| Thickness Tolerance | +/-0.050 in |
| Tensile Strength (PSI) | 70 to 100 |
| Thickness - Foam | 1/2 in |
| Stretch Limit | 200% to 300% |
| Temp. Range (F) | -100 to 180 |
| Width - Foam | 12 in |
| Density | 4 lb/cu ft |
| Firmness @ 25% Deflection (PSI) | 40 to 50 |
| Backing Type | Plain |
| Tensile Strength | 85 psi |
| Weather Resistance | Good |
| Material Skin | None |
| Maximum Temperature | 225 deg F |
| Number of Adhesive Sides | 0 |
| Oil Resistance | Good |
| Firmness | Firm (¿14 psi) |
| Abrasion Resistance | Excellent |
| Compression Set | 12 % |
| Adhesive Type | Not Applicable |
| Water Resistance | Good |
| Texture | Smooth |
| Grade | Standard |
| Firmness @ 25% Deflection | 14 psi |
| Chemical Resistance | Good |
| Minimum Temperature | -40 deg F |
| Minimum Adhesive Temperature | Not Applicable |
| Chemical Compatibility | Acetic Acid, 5%, Acetone, Ammonia, Anhydrous, Bleach, Citric Acid, Diesel Fuel, Ethanol, Ethylene Glycol, Gasoline, Hydraulic Oil, Hydrochloric Acid, Concentrated to 158 Degrees F, Hydrogen Peroxide, Isopropyl Alcohol, Kerosene, Lubricating Oils, Petroleum Base, Methanol, Mineral Oils, Motor Oil, Naphtha, Phosphoric Acid, Concentrated to 158 Degrees F, Propylene Glycol, Salt Water, Vegetable Oil, Water |
| Maximum Adhesive Temperature | Not Applicable |
| UV-Resistant | Not UV-Resistant |
| Shell Material | Polyethylene |
| Wire Color | Yellow |
| Country of Origin (subject to change) | China |