Foam Sheet, Material Polyethylene, Shape Sheet, Grade Standard, Length 48 in, Width 48 in, Thickness 3/8 in, Backing Type Plain, Cell Type Closed Cell, Adhesive Type Not Applicable, Number of Adhesive Sides 0, Color Blue, Density 4 lb/cu ft, Maximum Temperature 225 Degrees F, Minimum Temperature -40 Degrees F, Maximum Adhesive Temperature Not Applicable, Minimum Adhesive Temperature Not Applicable, Tensile Strength 85 psi, Texture Smooth, Firmness @ 25 Percent Deflection 14 psi
| Item | Foam Sheet |
|---|---|
| Color | Blue |
| Material | Polyethylene |
| Length | 48 in |
| Width | 48 in |
| Thickness | 3/8 in |
| Shape | Sheet |
| Cell Type | Closed Cell |
| Color - Foam | Blue |
| Width - Foam | 48 in |
| Firmness @ 25% Deflection (PSI) | 40 to 50 |
| Backing Type - Foam | Plain |
| Tensile Strength (PSI) | 70 to 100 |
| Cell Type - Foam | Crosslink |
| Thickness Tolerance | +/-0.038 in |
| Density | 4 lb/cu ft |
| Finish | Smooth Cellular |
| Type | Crosslink Foam |
| Item - Foam | Foam Sheet |
| Stretch Limit | 200% to 300% |
| Length - Foam | 48 in |
| Temp. Range (F) | -100 to 180 |
| Thickness - Foam | 3/8 in |
| Standards | MVSS 302 |
| Package Quantity | 1 |
| Width Tolerance | +/- 0.125 in |
| Material - Foam | Polyethylene |
| Length Tolerance | +/- 0.125 in |
| Backing Type | Plain |
| Tensile Strength | 85 psi |
| Chemical Resistance | Good |
| Oil Resistance | Good |
| Firmness @ 25% Deflection | 14 psi |
| Firmness | Firm (¿14 psi) |
| Weather Resistance | Good |
| Maximum Temperature | 225 deg F |
| Grade | Standard |
| Abrasion Resistance | Excellent |
| Material Skin | None |
| Compression Set | 12 % |
| Water Resistance | Good |
| Texture | Smooth |
| Minimum Temperature | -40 deg F |
| Number of Adhesive Sides | 0 |
| Adhesive Type | Not Applicable |
| Maximum Adhesive Temperature | Not Applicable |
| UV-Resistant | Not UV-Resistant |
| Chemical Compatibility | Acetic Acid, 5%, Acetone, Ammonia, Anhydrous, Bleach, Citric Acid, Diesel Fuel, Ethanol, Ethylene Glycol, Gasoline, Hydraulic Oil, Hydrochloric Acid, Concentrated to 158 Degrees F, Hydrogen Peroxide, Isopropyl Alcohol, Kerosene, Lubricating Oils, Petroleum Base, Methanol, Mineral Oils, Motor Oil, Naphtha, Phosphoric Acid, Concentrated to 158 Degrees F, Propylene Glycol, Salt Water, Vegetable Oil, Water |
| Minimum Adhesive Temperature | Not Applicable |
| Shell Material | Polyethylene |
| Wire Color | Blue |
| Country of Origin (subject to change) | China |