The ZORO SELECT - 1YYG3 is a Sheet Stock plastic sheet, known for its versatility and durability in various industrial applications. This PVC Type 1 material comes in a standard gray color and has properties that may resist corrosion and chemicals. It can be cut, shaped, or molded into different forms depending on the specific requirements of your project.
- Material: Made from PVC Type 1 material which offers unique benefits suitable for different industrial applications.
- Corrosion and Chemical Resistance: Has properties that may resist damage or degradation from exposure to corrosive substances, chemicals, or harsh environmental conditions.
- Machinability: Fair machinability allows this sheet stock to be easily cut, shaped, or finished using industrial tools without causing damage.
- Tensile Strength: Rated for a tensile strength of up to 8,350 psi (pounds per square inch).
- Temperature Range: Rated for operation within the specified temperature ranges from 32 Degrees F to 140 Degrees F.
- Water Absorption Rating: Has a water absorption rating which suggests potential resistance against moisture exposure. Suitability for specific applications depends on individual use conditions.
| Item | Sheet Stock |
|---|---|
| Plastic Material | PVC Type 1 |
| Plastic Thickness | 1/4 in |
| Plastic Width | 12 in |
| Plastic Length | 12 in |
| Plastic Color | Gray |
| Max. Temp. (F) | 140 |
| Min. Temp. (F) | 32 Degrees F |
| Color | Gray |
| Operating Temp. Range | 32 to 140 deg F |
| Material Color Family | Gray |
| Width Tolerance | +/-0.25 in |
| Standards | ASTM D1784, Flammability D 635, UL 94 |
| Thickness Tolerance | +/-10% |
| Material Type | Chemical Resistant |
| Tensile Strength | 8,350 psi |
| Plastic Properties | Chemical/Corrosion Resistant, Moisture Resistant, Oil Resistant, Wear Material |
| Impact Strength | 2.2 ft-lb/in |
| Length Tolerance | +/-0.250 in |
| Plastic Grouping | Sheet Stock |
| Thickness | 1/4 in |
| Material | PVC Type 1 |
| Width | 12" |
| Length | 12" |
| Wear Factor | Fair |
| Plastic Thickness Tolerance | +/-10% |
| Plastic Clarity | Opaque |
| Plastic Hardness | 84D |
| Tensile Strength Rating | Good |
| Water Absorption | 0.06% |
| UV Resistant | No |
| Impact Strength Rating | Poor |
| Grade | Standard |
| Maximum Temperature | 140 deg F |
| Friction Rating | Not Slippery |
| Temperature Range | 32 to 140 deg F |
| Machinability | 100 % |
| Plastic Length Tolerance | +/-1/4 in |
| Water Absorption Rating | Excellent |
| Corrosion and Chemical Resistance | Excellent |
| Plastic Width Tolerance | +/-1/4 in |
| Plastic Hardness Rating | Hard |
| Shape | Square |
| Nominal Size | 12 in W x 12 in L |
| Minimum Temperature | -4 deg F |
| Plastic Density | 1.42 g/cc |
| Maximum Adhesive Temperature | 140 deg F |
| Minimum Adhesive Temperature | -15 deg F |
| Friction Coefficient | 0.01 |
| Backing Type | Not Applicable |
| FDA Compliance | NSF51/NSF61/US P Class VI |
| Scratch-Resistant | Not Scratch-Resistant |
| Shore Hardness | 74 Shore D |
| Dielectric Strength | 544 V/mil |
| Coefficient of Thermal Expansion | 5.8 x 10.5in/in/ Degrees C |
| Static-Resistant | Not Static-Resistant |
| Fabrication | Extruded |
| Rockwell Hardness | 115 HRM |
| UL 752 Ballistic Rating | Not Applicable |
| Product Type | Plastic Sheet |
| Number of Walls | Not Applicable |
| UV-Resistant | Not UV-Resistant |
| Wear Rate | 5.00 x 10^-4 cu mm/N-m |
| Filler Material | Not Applicable |
| Elongation | 5 % |
| Light Transmission | 80 % |
| Flexural Modulus | 481,000 psi |
| Product Form | Sheet |
| Metal Detectable | No |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |