PVC Sheet, PVC Type 1, Grade Standard, Plastic Length 16 in, Plastic Width 16 in, Plastic Thickness 0.5 in, Gray, Plastic Clarity Opaque, Tensile Strength 7,200 psi, Impact Strength 1 ft-lb/in, Friction Coefficient 0.6, Water Absorption 0.2 Percent, Temperature Range -20 Degrees to 140 Degrees F, Plastic Density 0.051 lb/cu in, Plastic Hardness Rockwell R115
| Item | PVC Sheet |
|---|---|
| Plastic Material | PVC Type 1 |
| Plastic Thickness | 1/2 in |
| Plastic Width | 16 in |
| Plastic Length | 16 in |
| Plastic Color | Gray |
| Max. Temp. (F) | 140 |
| Min. Temp. (F) | -20 Degrees F |
| Color | Gray |
| Impact Strength | 1 ft-lb/in |
| Length Tolerance | (-1" - +1") |
| Thickness | 1/2 in |
| Length | 16" |
| Width | 16" |
| Operating Temp. Range | -20 to 140 deg F |
| Material | PVC Type 1 |
| Thickness Tolerance | -0.028" - +0" |
| Width Tolerance | (-0.25" - +0.25") |
| Standards | UL 94 HB |
| Tensile Strength | 7,200 psi |
| Grade | Standard |
| Impact Strength Rating | Poor |
| Plastic Hardness | Rockwell R115 |
| Shape | Square |
| Friction Coefficient | 0.6 |
| Water Absorption | 0.2% |
| Tensile Strength Rating | Good |
| Maximum Adhesive Temperature | Not Applicable |
| Water Absorption Rating | Good |
| Plastic Thickness Tolerance | +0.013/-0.041 in |
| Backing Type | No Backing |
| Plastic Clarity | Opaque |
| Plastic Density | 0.051 lb/cu in |
| Minimum Adhesive Temperature | Not Applicable |
| Friction Rating | Not Slippery |
| Wear Factor | Fair |
| Plastic Length Tolerance | +/-1 in |
| Maximum Temperature | 140 deg F |
| Minimum Temperature | -20 deg F |
| Plastic Hardness Rating | Hard |
| Temperature Range | -20 to 140 deg F |
| Corrosion and Chemical Resistance | Excellent |
| UV Resistant | No |
| Plastic Width Tolerance | +/-1 in |
| Machinability | 100 % |
| Nominal Size | 16 in W x 16 in L |
| Shore Hardness | 85 Shore D |
| Light Transmission | Not Applicable |
| UL 752 Ballistic Rating | Not Applicable |
| Scratch-Resistant | Not Scratch-Resistant |
| Elongation | 25 % |
| Weight | 6.66 lb |
| Coefficient of Thermal Expansion | 5 x 10^-5 K^-1 |
| Fabrication | Not Applicable |
| Static-Resistant | Not Static-Resistant |
| Wear Rate | Not Rated |
| Product Form | Sheet |
| FDA Compliance | Not FDA Compliant |
| Flexural Modulus | 3,300 MPa |
| UV-Resistant | Not UV-Resistant |
| Filler Material | Not Applicable |
| Rockwell Hardness | 115 HRR |
| Product Type | Plastic Sheet |
| Dielectric Strength | 14 kV/mm |
| Metal Detectable | No |
| Number of Walls | Not Applicable |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |