UHMW Polyethylene Bar, UHMW Polyethylene, Oil-Filled, Plastic Length 4 ft, Plastic Width 4 in, Plastic Thickness 0.5 in, Gray, Plastic Clarity Opaque, Tensile Strength 4,000 psi, Impact Strength No Break, Friction Coefficient 0.14, Water Absorption 0.01 Percent, Plastic Density 0.034 lb/cu in, Corrosion and Chemical Resistance Good
| Item | UHMW Polyethylene Bar |
|---|---|
| Plastic Material | UHMW Polyethylene |
| Plastic Thickness | 1/2 in |
| Plastic Width | 4 in |
| Plastic Length | 48 in |
| Plastic Color | Gray |
| Max. Temp. (F) | 180 |
| Min. Temp. (F) | -70 Degrees F |
| Color | Gray |
| Material | UHMW Polyethylene |
| Standards | Not Rated |
| Tensile Strength | 4,000 psi |
| Operating Temp. Range | -70 to 180 deg F |
| Material Type | Oil-Filled |
| Impact Strength | No Break |
| Plastic Length Tolerance | +/-1 in |
| Plastic Hardness Rating | Medium |
| Grade | Oil-Filled |
| Corrosion and Chemical Resistance | Good |
| Plastic Density | 0.034 lb/cu in |
| Plastic Hardness | 65D |
| Temperature Range | -70 to 180 deg F |
| Friction Coefficient | 0.14 |
| Water Absorption | 0.01% |
| Shape | Rectangular |
| Tensile Strength Rating | Poor |
| Impact Strength Rating | Excellent |
| Plastic Clarity | Opaque |
| Water Absorption Rating | Excellent |
| Plastic Width Tolerance | +/-1/4 in |
| Wear Factor | Excellent |
| Minimum Temperature | -70 deg F |
| Nominal Size | 4 in W x 48 in L |
| Friction Rating | Very Slippery |
| Maximum Temperature | 180 deg F |
| Plastic Thickness Tolerance | +0.017/-0.013 in |
| Machinability | 100 % |
| UV Resistant | No |
| Backing Type | No Backing |
| Minimum Adhesive Temperature | Not Applicable |
| Maximum Adhesive Temperature | Not Applicable |
| Scratch-Resistant | Not Scratch-Resistant |
| Dielectric Strength | 90.6 kV/mm |
| Light Transmission | Not Applicable |
| UV-Resistant | Not UV-Resistant |
| Weight | 4.13 lb |
| Filler Material | Oil |
| Static-Resistant | Not Static-Resistant |
| Coefficient of Thermal Expansion | Not Rated |
| Flexural Modulus | 400 MPa |
| Shore Hardness | 65 Shore D |
| Fabrication | Not Applicable |
| FDA Compliance | Not FDA Compliant |
| Wear Rate | Not Rated |
| Rockwell Hardness | 85 HRR |
| Metal Detectable | No |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |