Broca de longitud Jobber, Tamaño de broca 1/8 in, Ángulo de punta de broca 140 grados, Carburo, AlTiN, Equivalente decimal 0.1250, Pulgada fraccionaria, Tipo de punta de broca punta de 4 facetas, Sin paso de refrigerante
| Item | Jobber Length Drill Bit |
|---|---|
| Overall Length | 2 in |
| Drill Bit Point Angle | 140 deg |
| Drill Bit Size | 1/8 in |
| Number of Flutes | 2 |
| Shank Dia. | 1/8 in |
| Material - Machining | Carbide |
| Cutting Direction | Right Hand |
| Finish - Machining | AlTiN |
| Shank Type - Machining | Straight |
| Drill Bit Dimension Type | Fractional Inch |
| Depth:Dia. Ratio | 4 xD |
| Decimal Equivalent | 0.125 |
| Flute Type | Spiral |
| Application | Metalworking |
| Flute Length | 0.6 in |
| List Number | 4001 |
| Drill Bit Grouping | Drill Bit |
| Standards | Not Rated |
| Coolant Fed | Non-Coolant Through |
| Helix Angle | 25 deg |
| Drilling Depth | 0.6 in |
| Maximum Drilling Depth | 19/32 in |
| Spiral Direction | Right Hand |
| Web Construction | Split |
| Primary Material Application ISO Code | P, K, N, M, S, H, O |
| Primary Material Application | Materials |
| Material Grade - Machining | C2 |
| Drill Length Class | Jobber-Length |
| Drill Diameter Tolerance | +0.0000 in/-0.0005 in |
| Measurement System | Fractional Inch |
| Drill Bit Point Type | 4 Facet Point |
| Shank Length | 1.4 in |
| Helix Angle - Minimum | Not Applicable |
| Helix Angle - Maximum | 25 deg |
| Wire Rope Length | 2 in |
| Length | 2 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |