Socket Head Cap Screw, Head Type Flat, System of Measurement Metric, Drive Type Socket, Drive Size 6 mm, Material Steel, Material Grade/Class Class 10.9, Finish Black Oxide, Thread Size M10-1.5, Minimum Thread Length 35 mm, Fastener Length 35 mm, Head Height 6.2 mm, Head Diameter 22.4 mm, Pack Size Small Pack, Thread Style Fully Threaded, Special Features Not Applicable, Countersink Angle 90 Degrees , Dimensional Standards ISO 10642, Flange Diameter Not Applicable
| Item | Socket Head Cap Screw |
|---|---|
| Thread Size | M10-1.50 |
| Screw Length | 35 mm |
| Material | Steel |
| Finish | Black Oxide |
| Head Type | Flat |
| Drive Type | Hex |
| Drive Size | 6 mm |
| Tensile Strength | 150,800 psi |
| Standards | ISO 10642 |
| System of Measurement | Metric |
| Thread Direction | Right Hand |
| Fastener Thread Type | Metric Coarse |
| Head Angle (Deg.) | 90 |
| Thread Style | Fully Threaded |
| Thread Length | 35 mm |
| Head Height | 6.2 mm |
| Rockwell Hardness | C32 to C39 |
| Package Quantity | 50 |
| Min. Thread Length | 35 mm |
| Thread Type | Coarse |
| Flange Diameter | Not Applicable |
| Flange Thickness | Not Applicable |
| Pack Size | Small Pack |
| Head Diameter | 22.4 mm |
| Thread Pitch | 1.5 mm |
| Countersink Angle | 90 deg |
| Material Grade/Class | Class 10.9 |
| Minimum Thread Length | 35 mm |
| Dimensional Standards | ISO 10642 |
| Special Features | Not Applicable |
| Vent Hole Diameter | Not Applicable |
| Basic Material | Steel |
| Material Grade | Class 10.9 |
| Fastener Finish | Black Oxide |
| Min. Tensile Strength | 1,040 Mpa |
| Length | 35 mm |
| Fastener Industry Standards | ISO 10642 |
| Screw Head Type | Flat |
| Dia./Thread Size | M10-1.50 |
| Head Dia. | 22.4 mm |
| Fastener Length | 35 mm |
| Head Texture | Smooth |
| Non-Marring Tip | No |
| Type | Socket Head Cap Screw |
| Sealing Gasket | No |
| Shell Material | Alloy Steel |
| Country of Origin (subject to change) | Multiple |