Machine Screws, Head Type Flat, Material Steel, Finish Zinc-Plated, Drive Phillips, Thread Size M2.5x0.45, Fastener Length 10 mm, Head Width 4.7 mm, Head Height 1.5 mm, Drive Size #1, Tensile Strength 60,900 psi, Dimensional Standards DIN 965A, Pack Size Small, Minimum Thread Length Not Applicable, Type Machine Screw, Washer Outside Diameter Not Applicable, Washer Thickness Not Applicable, Maximum Head Width 4.7 mm, Minimum Head Width Not Applicable, Maximum Head Height 1.5 mm
| System of Measurement | Metric |
|---|---|
| Thread Size | M2.5-0.45 |
| Fastener Length | 10 mm |
| Head Type | Flat |
| Drive | Phillips |
| Drive Size | #1 |
| Material | Steel |
| Finish | Zinc Plated |
| Tensile Strength | 60,900 psi |
| Standards | DIN 965A, DIN EN ISO 7046 |
| Item | Machine Screw |
| Head Angle (Deg.) | 90 |
| Rockwell Hardness | B71 to B99 |
| Package Quantity | 100 |
| Head Dia. | 4.7 mm |
| Head Height | 1.5 mm |
| Washer Thickness | Not Applicable |
| Washer Type | Not Applicable |
| Material Grade/Class | 4.8 |
| Head Width | 4.7 mm |
| Thread Type | Coarse |
| Dimensional Standards | DIN 965A |
| Thread Pitch | 0.45 mm |
| Thread Fit | 6g |
| Screw Size | M2.5 |
| Pack Size | Small |
| Thread Style | Fully Threaded |
| Minimum Thread Length | Not Applicable |
| Overall Length | 10 mm |
| O-Ring Temperature - Minimum | Not Applicable |
| Maximum Head Width | 4.7 mm |
| Recommended Hole Size | Not Applicable |
| Washer Outside Diameter | Not Applicable |
| O-Ring Temperature - Maximum | Not Applicable |
| O-Ring Material | Not Applicable |
| Maximum Head Height | 1.5 mm |
| Type | Screw |
| Minimum Head Height | Not Applicable |
| Made in North America | Not Made in North America |
| Minimum Head Width | Not Applicable |
| O-Ring Pressure Rating | Not Applicable |
| Wire Rope Length | 10 mm |
| Length | 10 mm |
| Shell Material | Steel |
| Country of Origin (subject to change) | Taiwan, Province of China |