Standard Socket Head Cap Screw, Head Type Low-Profile Standard, System of Measurement Metric, Drive Type Socket, Drive Size 5 mm, Material Stainless Steel, Material Grade/Class 18-8, Finish Plain, Thread Size M8x1.25, Minimum Thread Length 25 mm, Fastener Length 25 mm, Head Height 5 mm, Head Diameter 13 mm, Pack Size Small Pack, Thread Style Fully Threaded, Special Features Not Applicable, Countersink Angle Not Applicable, Dimensional Standards DIN 7984, Flange Diameter Not Applicable
| Item | Socket Head Cap Screw |
|---|---|
| Thread Size | M8-1.25 |
| Screw Length | 25 mm |
| Material | 18-8 Stainless Steel |
| Finish | Plain |
| Head Type | Socket |
| Drive Type | Hex |
| Drive Size | 5 mm |
| Standards | DIN 7984 |
| System of Measurement | Metric |
| Head Dia. | 13 mm |
| Head Height | 5 mm |
| Thread Style | Fully Threaded |
| Screw Head Type | Low |
| Basic Material | Stainless Steel |
| Thread Direction | Right Hand |
| Material Grade | A2 |
| Fastener Finish | Plain |
| Dia./Thread Size | M8-1.25 |
| Length | 25 mm |
| Fastener Industry Standards | DIN 7984 |
| Thread Length | 25 mm |
| Fastener Thread Type | Metric Coarse |
| Thread Type | Coarse |
| Min. Thread Length | 25 mm |
| Thread Pitch | 1.25 mm |
| Countersink Angle | Not Applicable |
| Special Features | Not Applicable |
| Minimum Thread Length | 25 mm |
| Head Diameter | 13 mm |
| Dimensional Standards | DIN 7984 |
| Vent Hole Diameter | Not Applicable |
| Flange Thickness | Not Applicable |
| Flange Diameter | Not Applicable |
| Material Grade/Class | 18-8 |
| Pack Size | Small Pack |
| Fastener Length | 25 mm |
| Sealing Gasket | No |
| Non-Marring Tip | No |
| Tensile Strength | 80,000 psi |
| Head Texture | Smooth |
| Type | Socket Head Cap Screw |
| Shell Material | Stainless Steel |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 50 |