Split-Ring Hanger, Bolt Material Steel, Cushion Material Not Applicable, Cushioned No, For Maximum Outside Diameter 5/8 in, For Pipe Size 1/2 in, For Threaded Rod Size 3/8 in, Hanger Material Iron, Hanger Material Finish Copper-Plated, Hanger Material Grade Not Applicable, Hanger Type Swivel Loop, Included Insulation Thickness Not Applicable, Load Capacity 180 lb, Overall Height 1.9 in, Overall Width 1.2 in, Roller Length Not Applicable, Support Material Cast Iron
| Material | Copper Plated Malleable Iron |
|---|---|
| Length (In.) | 1.9 |
| Rod Size | 3/8 in |
| Pipe Size (In.) | 1/2 |
| Max. Load (Lb.) | 180 |
| Metal Detectable | Yes |
| Width | 1.2 in |
| Width (In.) | 1.2 |
| Type | MSS SP-58(Type 12) |
| Description/Special Features | For Suspending Stationary Non-Insulated Copper Tubing Lines |
| Standards | MSS SP-58, SP-69 |
| Item | Split-Ring Hanger |
| Roller Length | Not Applicable |
| Thread Size | 3/8"-16 |
| Includes Mounting Hardware | Yes |
| Bolt Material | Steel |
| For Environment | Indoor Pipe System |
| For Pipe Size | 1/2 in |
| Pipe Center to Rod | 29/32 in |
| For Threaded Rod Size | 3/8 in |
| Mount Type | Bolts, Screws |
| Included Insulation Thickness | Not Applicable |
| Support Material | Cast Iron |
| Minimum Operating Temperature | 0 deg F |
| Cushion Material | Not Applicable |
| Roller Diameter | Not Applicable |
| Maximum Operating Temperature | 200 deg F |
| Mounting Hole Diameter | 1/2 in |
| Cushioned | No |
| For Location | Indoor |
| For Rigid Conduit Size | 1/2 in |
| For Tube Outside Diameter | 1/2 in |
| For Insulated Pipe | No |
| Overall Width | 1.2 in |
| Closure | Bolts |
| Hanger Material Finish | Copper-Plated |
| Hanger Type | Loop |
| Pipe Center to Hanger Top | 25/32 in |
| Overall Height | 1.9 in |
| Hanger Material | Iron |
| For Strut Channel Width | 1/2 in |
| Series | Not Applicable |
| Load Capacity | 180 lb |
| Resistance Properties | Corrosion Resistant |
| Hanger Material Grade | Not Applicable |
| Required Number of Threaded Rods | 1 |
| For Maximum Outside Diameter | 5/8 in |
| Support Material Grade | Not Applicable |
| For Use On | Stationary Non-Insulated Copper Tube |
| Vertical Adjustment | 1/2 in |
| Shell Material | Malleable Iron |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |