Hammer Drive Pin Anchor, Anchor Diameter 1/4 in, Overall Length 3 in, Thread Size Not Applicable, Thread Length Not Applicable, Anchor Material Nylon, Pin Material Steel, Finish Plain, Head Type Mushroom, Drill Bit Size 1/4 in, Minimum Installation Depth 2 in, Maximum Material Thickness 1 1/4 in, Ultimate Tension Strength (4,000 psi Concrete) 55 lb, Pin-Drive Anchor Type Nylon Removable Nail Drive Anchor, System of Measurement Inch, Compatible Material Block, Brick, Concrete, Masonry
| Item | Nail Drive Anchor |
|---|---|
| Compatible Material | Concrete, Brick, Masonry, Block |
| Anchor Diameter | 1/4 in |
| Overall Length | 3 in |
| Material | Nylon |
| Finish | Zinc Plated |
| Drill Bit Size | 1/4 in |
| Minimum Installation Depth | 2 in |
| Ultimate Tension in 4000 PSI Concrete (Lb.) | 55 |
| Package Quantity | 100 |
| Head Style | Mushroom |
| Anchor Head Style | Mushroom |
| Pin Material | Steel |
| Maximum Material Thickness | 1-1/4 in |
| Max. Fixture Thickness | 1-1/4 in |
| Pin Anchor Type | Hammer Drive Pin Anchor |
| Anchor Material | Nylon |
| System of Measurement | Inch |
| Thread Size | Not Applicable |
| Thread Length | Not Applicable |
| Head Type | Mushroom |
| Removable | Removable |
| Pin-Drive Anchor Type | Nylon Removable Nail Drive Anchor |
| Ultimate Tension Strength (4,000 psi Concrete) | 55 lb |
| Pack Size | Small Pack |
| Wire Rope Length | 3 in |
| Length | 3 in |
| Country of Origin (subject to change) | Multiple |