Hammer Drive Pin Anchor, Anchor Diameter 1/2 in, Overall Length 3 1/2 in, Thread Size 1/2 In.-13, Thread Length 1 3/16 in, Anchor Material Steel, Pin Material Steel, Finish Zinc Yellow, Head Type Flat, Head Diameter Not Applicable, Head Height Not Applicable, Nut Width Not Applicable, Washer Outside Diameter Not Applicable, Drill Bit Size 1/2 in, Minimum Installation Depth 2 1/4 in, Maximum Material Thickness 3/4 in, Ultimate Shear Strength (4,000 psi Concrete) Not Applicable
| Item | Nail Drive Anchor |
|---|---|
| Anchor Material | Steel |
| Compatible Material | Concrete, Brick, Block, Stone |
| Anchor Diameter | 1/2 in |
| Thread Size | 1/2"-13 |
| Overall Length | 3-1/2 in |
| Material | Steel |
| Finish | Zinc |
| Drill Bit Size | 1/2 in |
| Head Type | Flat |
| Minimum Installation Depth | 2-1/4 in |
| Includes | Hex Nut, Washer |
| Package Quantity | 10 |
| Pin Material | Steel |
| Anchor Head Style | Hex Nut |
| Ultimate Tension in 4000 PSI Concrete (Lb.) | 4,052 |
| Head Style | Hex Nut |
| Maximum Material Thickness | 3/4 in |
| Max. Fixture Thickness | 3/4 in |
| Pin Anchor Type | Hammer Drive Pin Anchor |
| Thread Length | 1-3/16 in |
| Head Height | Not Applicable |
| System of Measurement | Inch |
| Pack Size | Small Pack |
| Ultimate Tension Strength (4,000 psi Concrete) | 4,052 lb |
| Nut Width | Not Applicable |
| Pin-Drive Anchor Type | Nail-Drive Anchor |
| Head Diameter | Not Applicable |
| Ultimate Shear Strength (4,000 psi Concrete) | Not Applicable |
| Washer Outside Diameter | Not Applicable |
| Wire Rope Length | 3-1/2 in |
| Length | 3-1/2 in |
| Country of Origin (subject to change) | Multiple |