Hammer Drive Pin Anchor, Anchor Diameter 5/16 in, Overall Length 2 in, Thread Size 5/16 In.-18, Thread Length 3/4 in, Anchor Material Steel, Pin Material Steel, Finish Zinc Yellow, Head Type Flat, Head Diameter Not Applicable, Head Height Not Applicable, Nut Width Not Applicable, Washer Outside Diameter Not Applicable, Drill Bit Size 5/16 in, Minimum Installation Depth 1 3/8 in, Maximum Material Thickness 3/16 in, Ultimate Shear Strength (4,000 psi Concrete) Not Applicable
| Item | Nail Drive Anchor |
|---|---|
| Anchor Material | Steel |
| Compatible Material | Concrete, Brick, Block, Stone |
| Anchor Diameter | 5/16 in |
| Thread Size | 5/16"-18 |
| Overall Length | 2 in |
| Material | Steel |
| Finish | Zinc |
| Drill Bit Size | 5/16 in |
| Head Type | Flat |
| Minimum Installation Depth | 1-3/8 in |
| Includes | Hex Nut, Washer |
| Ultimate Tension in 4000 PSI Concrete (Lb.) | 1,551 |
| Anchor Head Style | Hex Nut |
| Pin Material | Steel |
| Package Quantity | 25 |
| Head Style | Hex Nut |
| Maximum Material Thickness | 3/16 in |
| Pin Anchor Type | Hammer Drive Pin Anchor |
| Max. Fixture Thickness | 3/16 in |
| Nut Width | Not Applicable |
| System of Measurement | Inch |
| Pin-Drive Anchor Type | Nail-Drive Anchor |
| Ultimate Shear Strength (4,000 psi Concrete) | Not Applicable |
| Ultimate Tension Strength (4,000 psi Concrete) | 1,551 lb |
| Pack Size | Small Pack |
| Thread Length | 3/4 in |
| Head Diameter | Not Applicable |
| Washer Outside Diameter | Not Applicable |
| Head Height | Not Applicable |
| Wire Rope Length | 2 in |
| Length | 2 in |
| Country of Origin (subject to change) | Multiple |