Hammer Drive Pin Anchor, Anchor Diameter 3/8 in, Overall Length 4 3/4 in, Thread Size 3/8 In.-16, Thread Length 1 3/16 in, Anchor Material Steel, Pin Material Steel, Finish Zinc Yellow, Head Type Flat, Head Diameter Not Applicable, Head Height Not Applicable, Nut Width Not Applicable, Washer Outside Diameter Not Applicable, Drill Bit Size 3/8 in, Minimum Installation Depth 1 3/4 in, Maximum Material Thickness 2 5/8 in, Ultimate Shear Strength (4,000 psi Concrete) Not Applicable
| Item | Nail Drive Anchor |
|---|---|
| Anchor Material | Steel |
| Compatible Material | Concrete, Brick, Block, Stone |
| Anchor Diameter | 3/8 in |
| Thread Size | 3/8"-16 |
| Overall Length | 4-3/4 in |
| Material | Steel |
| Finish | Zinc |
| Drill Bit Size | 3/8 in |
| Head Type | Flat |
| Minimum Installation Depth | 1-3/4 in |
| Includes | Hex Nut, Washer |
| Ultimate Tension in 4000 PSI Concrete (Lb.) | 2,951 |
| Package Quantity | 25 |
| Pin Material | Steel |
| Anchor Head Style | Hex Nut |
| Head Style | Hex Nut |
| Maximum Material Thickness | 2-5/8 in |
| Pin Anchor Type | Hammer Drive Pin Anchor |
| Max. Fixture Thickness | 2-5/8 in |
| Ultimate Tension Strength (4,000 psi Concrete) | 2,951 lb |
| Thread Length | 1-3/16 in |
| Ultimate Shear Strength (4,000 psi Concrete) | Not Applicable |
| Pin-Drive Anchor Type | Nail-Drive Anchor |
| Nut Width | Not Applicable |
| Head Height | Not Applicable |
| Pack Size | Small Pack |
| Washer Outside Diameter | Not Applicable |
| Head Diameter | Not Applicable |
| System of Measurement | Inch |
| Wire Rope Length | 4-3/4 in |
| Length | 4-3/4 in |
| Country of Origin (subject to change) | Multiple |