Hammer Drive Pin Anchor, Anchor Diameter 3/4 in, Overall Length 6 in, Thread Size 3/4 In.-10, Thread Length 1 15/16 in, Anchor Material Steel, Pin Material Steel, Finish Zinc Yellow, Head Type Flat, Head Diameter Not Applicable, Head Height Not Applicable, Nut Width Not Applicable, Washer Outside Diameter Not Applicable, Drill Bit Size 3/4 in, Minimum Installation Depth 3 1/2 in, Maximum Material Thickness 2 in, Ultimate Shear Strength (4,000 psi Concrete) Not Applicable
| CAD Available | Yes |
|---|---|
| Item | Nail Drive Anchor |
| Compatible Material | Concrete, Brick, Block, Stone |
| Anchor Diameter | 3/4 in |
| Overall Length | 6 in |
| Material | Steel |
| Finish | Zinc |
| Drill Bit Size | 3/4 in |
| Minimum Installation Depth | 3-1/2 in |
| Anchor Head Style | Hex Nut |
| Ultimate Tension in 4000 PSI Concrete (Lb.) | 13,755 |
| Pin Material | Steel |
| Package Quantity | 4 |
| Thread Size | 3/4"-10 |
| Anchor Material | Steel |
| Head Style | Hex Nut |
| Maximum Material Thickness | 2 in |
| Includes | Hex Nut, Washer |
| Max. Fixture Thickness | 2 in |
| Head Type | Flat |
| Pin Anchor Type | Hammer Drive Pin Anchor |
| Ultimate Tension Strength (4,000 psi Concrete) | 13,755 lb |
| System of Measurement | Inch |
| Pin-Drive Anchor Type | Nail-Drive Anchor |
| Ultimate Shear Strength (4,000 psi Concrete) | Not Applicable |
| Head Height | Not Applicable |
| Head Diameter | Not Applicable |
| Washer Outside Diameter | Not Applicable |
| Pack Size | Small Pack |
| Nut Width | Not Applicable |
| Thread Length | 1-15/16 in |
| Wire Rope Length | 6 in |
| Length | 6 in |
| Country of Origin (subject to change) | Multiple |