Hammer Drive Pin Anchor, Anchor Diameter 1/4 in, Overall Length 2 3/8 in, Thread Size 1/4 In.-20, Thread Length 3/4 in, Anchor Material Steel, Pin Material Steel, Finish Zinc Yellow, Head Type Flat, Head Diameter Not Applicable, Head Height Not Applicable, Nut Width Not Applicable, Washer Outside Diameter Not Applicable, Drill Bit Size 1/4 in, Minimum Installation Depth 1 1/8 in, Maximum Material Thickness 1 in, Ultimate Shear Strength (4,000 psi Concrete) Not Applicable
| Item | Nail Drive Anchor |
|---|---|
| Anchor Material | Steel |
| Compatible Material | Concrete, Brick, Block, Stone |
| Anchor Diameter | 1/4 in |
| Thread Size | 1/4"-20 |
| Overall Length | 2-3/8 in |
| Material | Steel |
| Finish | Zinc |
| Drill Bit Size | 1/4 in |
| Head Type | Flat |
| Minimum Installation Depth | 1-1/8 in |
| Includes | Hex Nut, Washer |
| Pin Material | Steel |
| Package Quantity | 50 |
| Anchor Head Style | Hex Nut |
| Ultimate Tension in 4000 PSI Concrete (Lb.) | 1,254 |
| Head Style | Hex Nut |
| Maximum Material Thickness | 1 in |
| Max. Fixture Thickness | 1 in |
| Pin Anchor Type | Hammer Drive Pin Anchor |
| Nut Width | Not Applicable |
| System of Measurement | Inch |
| Washer Outside Diameter | Not Applicable |
| Thread Length | 3/4 in |
| Pin-Drive Anchor Type | Nail-Drive Anchor |
| Pack Size | Small Pack |
| Head Height | Not Applicable |
| Head Diameter | Not Applicable |
| Ultimate Shear Strength (4,000 psi Concrete) | Not Applicable |
| Ultimate Tension Strength (4,000 psi Concrete) | 1,254 lb |
| Wire Rope Length | 2-3/8 in |
| Length | 2-3/8 in |
| Country of Origin (subject to change) | Multiple |