Jobber Length Drill Bit, Drill Bit Size #50, Drill Bit Point Angle 118 Degrees , Carbide, Bright (Uncoated), Decimal Equivalent 0.0700, Wire, Drill Bit Point Type 4 Facet Point, Non-Coolant Through
| Item | Jobber Length Drill Bit |
|---|---|
| Overall Length | 1-3/4 in |
| Drill Bit Point Angle | 118 deg |
| Drill Bit Size | #50 |
| Number of Flutes | 2 |
| Shank Dia. | 1.7 mm |
| Material - Machining | Carbide |
| Cutting Direction | Right Hand |
| Finish - Machining | Bright |
| Shank Type - Machining | Straight |
| Application | Metalworking |
| Drill Bit Dimension Type | Wire |
| Decimal Equivalent | 0.07 |
| Flute Type | Spiral |
| Drill Bit Grouping | Drill Bit |
| Flute Length | 7/8 in |
| List Number | 450 |
| Depth:Dia. Ratio | 13 xD |
| Standards | Not Rated |
| Coolant Fed | Non-Coolant Through |
| Drilling Depth | 7/8 in |
| Helix Angle | 25 deg |
| Spiral Direction | Right Hand |
| Web Thinning | Thinned |
| Drill Length Class | Jobber-Length |
| Drill Diameter Tolerance | +0.0000 in/-0.0005 in |
| Web Construction | Split |
| Shank Length | 7/8 in |
| Material Grade - Machining | C2 |
| Drill Bit Point Type | 4 Facet Point |
| Measurement System | Wire |
| Primary Material Application ISO Code | P, K, N, M, S, H, O |
| Primary Material Application | Materials |
| Maximum Drilling Depth | 7/8 in |
| Helix Angle - Minimum | Not Applicable |
| Helix Angle - Maximum | 25 deg |
| Wire Rope Length | 1-3/4 in |
| Length | 1-3/4 in |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |