Broca de taladro de longitud Jobber, tamaño de broca #54, ángulo de punta de broca 118 grados, carburo, AlTiN, equivalente decimal 0.0550, calibre de alambre, tipo de punta de broca punta de 4 facetas, sin paso de refrigerante
| Item | Jobber Length Drill Bit |
|---|---|
| Overall Length | 1-1/2 in |
| Drill Bit Point Angle | 118 deg |
| Drill Bit Size | #54 |
| Number of Flutes | 2 |
| Shank Dia. | 1.4 mm |
| Material - Machining | Carbide |
| Cutting Direction | Right Hand |
| Finish - Machining | AlTiN |
| Shank Type - Machining | Straight |
| Flute Length | 3/4 in |
| Drill Bit Grouping | Drill Bit |
| List Number | 450 |
| Depth:Dia. Ratio | 14 xD |
| Decimal Equivalent | 0.055 |
| Application | Metalworking |
| Drill Bit Dimension Type | Wire |
| Flute Type | Spiral |
| Standards | Not Rated |
| Coolant Fed | Non-Coolant Through |
| Drilling Depth | 3/4 in |
| Helix Angle | 25 deg |
| Drill Diameter Tolerance | +0.0000 in/-0.0005 in |
| Primary Material Application ISO Code | P, K, N, M, S, H, O |
| Drill Bit Point Type | 4 Facet Point |
| Web Construction | Split |
| Material Grade - Machining | C2 |
| Measurement System | Wire |
| Maximum Drilling Depth | 3/4 in |
| Drill Length Class | Jobber-Length |
| Shank Length | 3/4 in |
| Primary Material Application | Materials |
| Spiral Direction | Right Hand |
| Web Thinning | Thinned |
| Helix Angle - Maximum | 25 deg |
| Helix Angle - Minimum | Not Applicable |
| Wire Rope Length | 1-1/2 in |
| Length | 1-1/2 in |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |