Lock Nut, Finish Zinc-Plated, Material Steel, Material Grade/Class Grade A, Thread Size #10-24, Hex Width 3/8 in, Hex Height 1/8 in, Lock Type Nylon Insert, Dimensional Standards ASME 18.18, ASME B1.1, ASME B18.16.4, SAE J429, Material Quality Standards ASTM F788, System of Measurement Inch, Hex Type Flange Hex, Thread Direction Right Hand, Color Clear, Industry Standards IFI 100/107, Insert Material Nylon, Maximum Temperature 250 Degrees F, Pack Size Small Pack
| Item | Lock Nut |
|---|---|
| Thread Size | #10-24 |
| Hex Type | Flange Hex |
| Lock Type | Nylon Insert |
| Material | Steel |
| Material Grade/Class | Grade A |
| Finish | Zinc Plated |
| Hex Height | 1/8 in |
| Hex Width | 3/8 in |
| Standards | ASME 18.18; ASME B1.1; ASME B18.16.4; ASTM F788; IFI-100/107; SAE J429 |
| System of Measurement | Inch |
| Thread Direction | Right Hand |
| Thread Type | Coarse |
| Color | Clear |
| Pack Size | Small Pack |
| Resistance Properties | Chemical-Resistant, Impact-Resistant, High Temperature-Resistant |
| Maximum Temperature | 250 deg F |
| Thread Fit | 2B |
| Rockwell Hardness | HRC 32 Max |
| Dia./Thread Size | #10-24 |
| Dimensional Standards | ASME 18.18, ASME B1.1, ASME B18.16.4, SAE J429 |
| Nut Standards | IFI-100/107 |
| Fastener Finish | Zinc |
| Nut Style | Nylon Insert Lock Nut - Flanged |
| Material Grade | Grade 2 |
| Type | Nylon Insert Lock Nut |
| Basic Material | Steel |
| Material Quality Standards | ASTM F788 |
| Nut Height | 1/4 in |
| Width Across Flats | 3/8 in |
| Fastener Thread Type | UNC (Coarse) |
| Fastener Thread Direction | Right Hand |
| Insert Material | Nylon |
| Temperature - Maximum | 250 deg F |
| Washer Outside Diameter | Not Applicable |
| For Screw Size | #10 |
| Tensile Strength | Not Applicable |
| Industry Standards | IFI 100/107 |
| Shell Material | Steel |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 100 |