Broca de taladro de longitud Jobber, Tamaño de broca O, Ángulo de punta de broca 118 grados, Acero de alta velocidad, Óxido negro, Equivalente decimal 0.3160, Letra, Tipo de punta de broca Punta convencional, Sin refrigerante pasante, Número de orificios de refrigerante 0
| Item | Jobber Length Drill Bit |
|---|---|
| Overall Length | 4-1/2 in |
| Drill Bit Point Angle | 118 deg |
| Drill Bit Size | O |
| Number of Flutes | 2 |
| Shank Dia. | 5/16 in |
| Material - Machining | High Speed Steel |
| Cutting Direction | Right Hand |
| Finish - Machining | Black Oxide |
| Shank Type - Machining | Straight |
| Number of Pieces | 1 |
| Decimal Equivalent | 0.316 |
| Flute Length | 3-3/16 in |
| Application | For Alloy and Carbon Steels, Aluminum, Brass, Bronze, Cast Iron, Nickel based Alloys, Plastic and Wood |
| Drill Bit Dimension Type | Letter |
| Drill Bit Grouping | Drill Bit |
| Flute Type | Spiral |
| List Number | Westward |
| Standards | ANSI |
| Coolant Fed | Non-Coolant Through |
| Drill Length Class | Jobber-Length |
| Drill Bit Point Type | Conventional Point |
| Material Grade - Machining | General Purpose |
| Measurement System | Letter |
| Maximum Drilling Depth | 2-3/8 in |
| Primary Material Application ISO Code | P, K |
| Primary Material Application | Cast Iron, Steel |
| Spiral Direction | Right Hand |
| Depth:Dia. Ratio | 4 xD |
| Shank Length | 1-5/16 in |
| Helix Angle | 21 Degrees to 34 Degrees |
| Aircraft Drill | No |
| Sheeter Drill | No |
| Drill Diameter Tolerance | +0.0000 in/-0.0010 in |
| Web Thinning | Thinned |
| Number of Coolant Holes | 0 |
| Helix Angle - Maximum | 34 deg |
| Secondary Material Application | Aluminum, Brass, Bronze, Copper |
| Helix Angle - Minimum | 21 deg |
| Secondary Material Application ISO Code | N |
| Wire Rope Length | 4-1/2 in |
| Length | 4-1/2 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |