O-Ring, Not Metal Detectable Metal Detectable, Not X-Ray Detectable X-Ray Detectable, System of Measurement Inch, Cross Section Shape Round, O-Ring Material PTFE, Durometer (Hardness) Rating Very Hard, Nominal Inside Dia. 1 1/16 in, Nominal Width 1/8 in, Actual Inside Dia. 1.046 in, Actual Width 0.139 in, Dash Number 215, Color White, Durometer 55D, Nominal Outside Dia. 1 5/16 in, Actual Outside Dia. 1.324 in, Temp. Range -100 Degrees to 500 Degrees F, FDA Approved FDA Compliant
| Dash Number | 215 |
|---|---|
| System of Measurement | Inch |
| Cross Section Shape | Round |
| Cross-Section Shape | Round |
| O-Ring Material | PTFE |
| O-Ring Material Compatibility | Water, Carbon Dioxide, Nitrogen, Detergents, Silicone Grease, Hydraulic Oils, Mineral Oil, Vegetable Oils, Natural Gas, Fatty Acids, Gasoline, Lubricating Oils, Kerosene, Diesel Oil, Hydrochloric Acid, Ethanol, Methanol, Bleach, Toluene, Animal Fats, Liquid, Propane Gas, Acids, Sulfuric, Steam, Acetone, Ammonia, Anhydrous |
| Durometer | 55D |
| Color | White |
| Nominal Inside Dia. | 1-1/16 in |
| Actual Inside Dia. | 1.046 in |
| Nominal Outside Dia. | 1-5/16 in |
| X-Ray Detectable | No |
| Durometer (Hardness) Rating | Very Hard |
| Temp. Range | -100 Degrees to 500 Degrees F |
| FDA Approved | FDA Compliant |
| X-Ray Dectectable | No |
| Actual Width | 0.139 in |
| Item | O-Ring |
| Actual Outside Dia. | 1.324 in |
| Metal Detectable | No |
| Nominal Width | 1/8 in |
| Type | O-Ring |
| Product Type | O-Ring |
| Material | PTFE |
| Operating Temperature - Minimum | -100 deg F |
| Width - Actual | 0.139 in |
| Cross-Section Width | 1/8 in |
| Inside Diameter - Actual | 1.046 in |
| Inside Diameter - Nominal | 1-1/16 in |
| Outside Diameter - Actual | 1.324 in |
| Operating Temperature - Maximum | 500 deg F |
| Outside Diameter - Nominal | 1-5/16 in |
| Shell Material | PTFE |
| Wire Color | White |
| Country of Origin (subject to change) | Italy |
| Package Quantity | 10 |