O-Ring, Not Metal Detectable Metal Detectable, Not X-Ray Detectable X-Ray Detectable, System of Measurement Inch, Cross Section Shape Round, O-Ring Material Viton, Durometer (Hardness) Rating Very Hard, Nominal Inside Dia. 1 1/4 in, Nominal Width 3/16 in, Actual Inside Dia. 1.225 in, Actual Width 0.21 in, Dash Number 322, Color Black, Durometer 90A, Meets/Exceeds ASTM D2000, SAE J200, Nominal Outside Dia. 1 5/8 in, Actual Outside Dia. 1.645 in, Temp. Range -15 Degrees to 400 Degrees F
| Dash Number | 322 |
|---|---|
| System of Measurement | Inch |
| Cross Section Shape | Round |
| Cross-Section Shape | Round |
| O-Ring Material | Viton |
| O-Ring Material Compatibility | Water, Nitrogen, Silicone Grease, Mineral Oil, Vegetable Oils, Natural Gas, Lubricating Oils, Sulfuric Acid, Toluene, Propane Gas, Carbon Dioxide, Detergents, Hydraulic Oils, Fatty Acids, Gasoline, Kerosene, Diesel Oil, Hydrochloric Acid, Bleach, Animal Fats, Liquid |
| Durometer | 90A |
| Color | Black |
| Nominal Inside Dia. | 1-1/4 in |
| Actual Inside Dia. | 1.225 in |
| Nominal Outside Dia. | 1-5/8 in |
| Durometer (Hardness) Rating | Very Hard |
| Temp. Range | -15 Degrees to 400 Degrees F |
| X-Ray Detectable | No |
| X-Ray Dectectable | No |
| Actual Outside Dia. | 1.645 in |
| Actual Width | 0.21 in |
| Meets/Exceeds | ASTM D2000, SAE J200 |
| Nominal Width | 3/16 in |
| Item | O-Ring |
| Metal Detectable | No |
| FDA Approved | Not FDA Compliant |
| Type | O-Ring |
| Product Type | O-Ring |
| Material | Viton |
| Operating Temperature - Minimum | -15 deg F |
| Outside Diameter - Nominal | 1-5/8 in |
| Outside Diameter - Actual | 1.645 in |
| Inside Diameter - Actual | 1.225 in |
| Inside Diameter - Nominal | 1-1/4 in |
| Cross-Section Width | 3/16 in |
| Width - Actual | 0.21 in |
| Standards | ASTM D2000, SAE J200 |
| Application | Standard |
| Operating Temperature - Maximum | 450 deg F |
| Shell Material | Viton |
| Wire Color | Black |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 10 |