O-Ring, Not Metal Detectable Metal Detectable, Not X-Ray Detectable X-Ray Detectable, System of Measurement Inch, Cross Section Shape Round, O-Ring Material Viton, Durometer (Hardness) Rating Very Hard, Nominal Inside Dia. 1 1/8 in, Nominal Width 3/32 in, Actual Inside Dia. 1.112 in, Actual Width 0.103 in, Dash Number 122, Color Black, Durometer 90A, Meets/Exceeds ASTM D2000, SAE J200, Nominal Outside Dia. 1 5/16 in, Actual Outside Dia. 1.318 in, Temp. Range -15 Degrees to 400 Degrees F
| Dash Number | 122 |
|---|---|
| System of Measurement | Inch |
| Cross Section Shape | Round |
| Cross-Section Shape | Round |
| O-Ring Material | Viton |
| O-Ring Material Compatibility | Water, Nitrogen, Silicone Grease, Mineral Oil, Vegetable Oils, Natural Gas, Lubricating Oils, Sulfuric Acid, Toluene, Propane Gas, Carbon Dioxide, Detergents, Hydraulic Oils, Fatty Acids, Gasoline, Kerosene, Diesel Oil, Hydrochloric Acid, Bleach, Animal Fats, Liquid |
| Durometer | 90A |
| Color | Black |
| Nominal Inside Dia. | 1-1/8 in |
| Actual Inside Dia. | 1.112 in |
| Nominal Outside Dia. | 1-5/16 in |
| X-Ray Detectable | No |
| Actual Outside Dia. | 1.318 in |
| Metal Detectable | No |
| Actual Width | 0.103 in |
| X-Ray Dectectable | No |
| Item | O-Ring |
| Temp. Range | -15 Degrees to 400 Degrees F |
| Nominal Width | 3/32 in |
| FDA Approved | Not FDA Compliant |
| Meets/Exceeds | ASTM D2000, SAE J200 |
| Durometer (Hardness) Rating | Very Hard |
| Type | O-Ring |
| Product Type | O-Ring |
| Material | Viton |
| Standards | ASTM D2000, SAE J200 |
| Outside Diameter - Nominal | 1-5/16 in |
| Width - Actual | 0.103 in |
| Operating Temperature - Maximum | 450 deg F |
| Cross-Section Width | 3/32 in |
| Application | Standard |
| Operating Temperature - Minimum | -15 deg F |
| Inside Diameter - Nominal | 1-1/8 in |
| Outside Diameter - Actual | 1.318 in |
| Inside Diameter - Actual | 1.112 in |
| Shell Material | Viton |
| Wire Color | Black |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 50 |