O-Ring, Not Metal Detectable Metal Detectable, Not X-Ray Detectable X-Ray Detectable, System of Measurement Inch, Cross Section Shape Round, O-Ring Material PTFE, Durometer (Hardness) Rating Very Hard, Nominal Inside Dia. 1 5/8 in, Nominal Width 1/16 in, Actual Inside Dia. 1.614 in, Actual Width 0.07 in, Dash Number 030, Color White, Durometer 55D, Nominal Outside Dia. 1 3/4 in, Actual Outside Dia. 1.754 in, Temp. Range -300 Degrees to 500 Degrees F, FDA Approved FDA Compliant
| Dash Number | 030 |
|---|---|
| System of Measurement | Inch |
| Cross Section Shape | Round |
| Cross-Section Shape | Round |
| O-Ring Material | PTFE |
| O-Ring Material Compatibility | Water, Carbon Dioxide, Nitrogen, Detergents, Silicone Grease, Hydraulic Oils, Mineral Oil, Vegetable Oils, Natural Gas, Fatty Acids, Gasoline, Lubricating Oils, Kerosene, Diesel Oil, Hydrochloric Acid, Ethanol, Methanol, Bleach, Toluene, Animal Fats, Liquid, Propane Gas, Acids, Sulfuric, Steam, Acetone, Ammonia, Anhydrous |
| Durometer | 55D |
| Color | White |
| Nominal Inside Dia. | 1-5/8 in |
| Actual Inside Dia. | 1.614 in |
| Nominal Outside Dia. | 1-3/4 in |
| FDA Approved | FDA Compliant |
| X-Ray Dectectable | No |
| Temp. Range | -300 Degrees to 500 Degrees F |
| Item | O-Ring |
| Actual Outside Dia. | 1.754 in |
| Actual Width | 0.07 in |
| X-Ray Detectable | No |
| Durometer (Hardness) Rating | Very Hard |
| Metal Detectable | No |
| Nominal Width | 1/16 in |
| Type | O-Ring |
| Product Type | O-Ring |
| Material | PTFE |
| Width - Actual | 0.07 in |
| Operating Temperature - Maximum | 500 deg F |
| Inside Diameter - Actual | 1.614 in |
| Inside Diameter - Nominal | 1-5/8 in |
| Cross-Section Width | 1/16 in |
| Outside Diameter - Actual | 1.754 in |
| Operating Temperature - Minimum | -300 deg F |
| Outside Diameter - Nominal | 1-3/4 in |
| Shell Material | PTFE |
| Wire Color | White |
| Country of Origin (subject to change) | Italy |
| Package Quantity | 10 |