O-Ring, Not Metal Detectable Metal Detectable, Not X-Ray Detectable X-Ray Detectable, System of Measurement Inch, Cross Section Shape Round, O-Ring Material Viton, Durometer (Hardness) Rating Medium Hard, Nominal Inside Dia. 1 9/40 in, Nominal Width 3/16 in, Actual Inside Dia. 1.225 in, Actual Width 0.21 in, Dash Number 322, Color Black, Durometer 75A, Meets/Exceeds ASTM D2000, SAE J200, Nominal Outside Dia. 1 129/200 in, Actual Outside Dia. 1.645 in, Temp. Range -15 Degrees to 400 Degrees F
| Dash Number | 322 |
|---|---|
| System of Measurement | Inch |
| Cross Section Shape | Round |
| Cross-Section Shape | Round |
| O-Ring Material | Viton |
| O-Ring Material Compatibility | Water, Nitrogen, Silicone Grease, Mineral Oil, Vegetable Oils, Natural Gas, Lubricating Oils, Sulfuric Acid, Toluene, Propane Gas, Carbon Dioxide, Detergents, Hydraulic Oils, Fatty Acids, Gasoline, Kerosene, Diesel Oil, Hydrochloric Acid, Bleach, Animal Fats, Liquid |
| Durometer | 75A |
| Color | Black |
| Nominal Inside Dia. | 1.225 in |
| Actual Inside Dia. | 1.225 in |
| Nominal Outside Dia. | 1.645 in |
| X-Ray Detectable | No |
| Nominal Width | 3/16 in |
| Metal Detectable | No |
| Actual Outside Dia. | 1.645 in |
| FDA Approved | Not FDA Compliant |
| Actual Width | 0.21 in |
| X-Ray Dectectable | No |
| Item | O-Ring |
| Durometer (Hardness) Rating | Medium Hard |
| Temp. Range | -15 Degrees to 400 Degrees F |
| Meets/Exceeds | ASTM D2000, SAE J200 |
| Type | O-Ring |
| Product Type | O-Ring |
| Material | Viton |
| Inside Diameter - Actual | 1.225 in |
| Outside Diameter - Actual | 1.645 in |
| Standards | ASTM D2000, SAE J200 |
| Width - Actual | 0.21 in |
| Cross-Section Width | 3/16 in |
| Inside Diameter - Nominal | 1-7/32 in |
| Operating Temperature - Maximum | 450 deg F |
| Application | Standard |
| Operating Temperature - Minimum | -15 deg F |
| Outside Diameter - Nominal | 1-41/64 in |
| Shell Material | Viton |
| Wire Color | Black |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 10 |