O-Ring, Not Metal Detectable Metal Detectable, Not X-Ray Detectable X-Ray Detectable, System of Measurement Inch, Cross Section Shape Round, O-Ring Material PTFE, Durometer (Hardness) Rating Very Hard, Nominal Inside Dia. 1/2 in, Nominal Width 3/32 in, Actual Inside Dia. 0.487 in, Actual Width 0.103 in, Dash Number 112, Color White, Durometer 55D, Nominal Outside Dia. 11/16 in, Actual Outside Dia. 0.693 in, Temp. Range -300 Degrees to 500 Degrees F, FDA Approved FDA Compliant
| Dash Number | 112 |
|---|---|
| System of Measurement | Inch |
| Cross Section Shape | Round |
| Cross-Section Shape | Round |
| O-Ring Material | PTFE |
| O-Ring Material Compatibility | Water, Carbon Dioxide, Nitrogen, Detergents, Silicone Grease, Hydraulic Oils, Mineral Oil, Vegetable Oils, Natural Gas, Fatty Acids, Gasoline, Lubricating Oils, Kerosene, Diesel Oil, Hydrochloric Acid, Ethanol, Methanol, Bleach, Toluene, Animal Fats, Liquid, Propane Gas, Acids, Sulfuric, Steam, Acetone, Ammonia, Anhydrous |
| Durometer | 55D |
| Color | White |
| Nominal Inside Dia. | 1/2 in |
| Actual Inside Dia. | 0.487 in |
| Nominal Outside Dia. | 11/16 in |
| Temp. Range | -300 Degrees to 500 Degrees F |
| Item | O-Ring |
| Nominal Width | 3/32 in |
| Actual Outside Dia. | 0.693 in |
| X-Ray Detectable | No |
| Durometer (Hardness) Rating | Very Hard |
| FDA Approved | FDA Compliant |
| Actual Width | 0.103 in |
| X-Ray Dectectable | No |
| Metal Detectable | No |
| Type | O-Ring |
| Product Type | O-Ring |
| Material | PTFE |
| Cross-Section Width | 3/32 in |
| Outside Diameter - Nominal | 11/16 in |
| Outside Diameter - Actual | 0.693 in |
| Inside Diameter - Actual | 0.487 in |
| Operating Temperature - Minimum | -300 deg F |
| Width - Actual | 0.103 in |
| Operating Temperature - Maximum | 500 deg F |
| Inside Diameter - Nominal | 1/2 in |
| Shell Material | PTFE |
| Wire Color | White |
| Country of Origin (subject to change) | Italy |
| Package Quantity | 25 |