O-Ring, Not Metal Detectable Metal Detectable, Not X-Ray Detectable X-Ray Detectable, System of Measurement Inch, Cross Section Shape Round, O-Ring Material Viton, Durometer (Hardness) Rating Very Hard, Nominal Inside Dia. 18 in, Nominal Width 3/16 in, Actual Inside Dia. 17.955 in, Actual Width 0.21 in, Dash Number 387, Color Black, Durometer 90A, Meets/Exceeds ASTM D2000, SAE J200, Nominal Outside Dia. 18 3/8 in, Actual Outside Dia. 18.375 in, Temp. Range -15 Degrees to 400 Degrees F
| Dash Number | 387 |
|---|---|
| System of Measurement | Inch |
| Cross Section Shape | Round |
| Cross-Section Shape | Round |
| O-Ring Material | Viton |
| O-Ring Material Compatibility | Water, Nitrogen, Silicone Grease, Mineral Oil, Vegetable Oils, Natural Gas, Lubricating Oils, Sulfuric Acid, Toluene, Propane Gas, Carbon Dioxide, Detergents, Hydraulic Oils, Fatty Acids, Gasoline, Kerosene, Diesel Oil, Hydrochloric Acid, Bleach, Animal Fats, Liquid |
| Durometer | 90A |
| Color | Black |
| Nominal Inside Dia. | 18 in |
| Actual Inside Dia. | 17.955 in |
| Nominal Outside Dia. | 18-3/8 in |
| Nominal Width | 3/16 in |
| Meets/Exceeds | ASTM D2000, SAE J200 |
| Item | O-Ring |
| Actual Outside Dia. | 18-3/8 in |
| X-Ray Dectectable | No |
| Metal Detectable | No |
| X-Ray Detectable | No |
| Temp. Range | -15 Degrees to 400 Degrees F |
| Actual Width | 0.21 in |
| Durometer (Hardness) Rating | Very Hard |
| FDA Approved | Not FDA Compliant |
| Type | O-Ring |
| Product Type | O-Ring |
| Material | Viton |
| Standards | ASTM D2000, SAE J200 |
| Outside Diameter - Actual | 18-3/8 in |
| Width - Actual | 0.21 in |
| Application | Standard |
| Operating Temperature - Minimum | -15 deg F |
| Operating Temperature - Maximum | 450 deg F |
| Inside Diameter - Nominal | 18 in |
| Inside Diameter - Actual | 17.955 in |
| Outside Diameter - Nominal | 18-3/8 in |
| Cross-Section Width | 3/16 in |
| Shell Material | Viton |
| Wire Color | Black |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |