O-Ring, Not Metal Detectable Metal Detectable, Not X-Ray Detectable X-Ray Detectable, System of Measurement Inch, Cross Section Shape Round, O-Ring Material Viton, Durometer (Hardness) Rating Very Hard, Nominal Inside Dia. 3 in, Nominal Width 3/16 in, Actual Inside Dia. 2.975 in, Actual Width 0.21 in, Dash Number 337, Color Black, Durometer 90A, Meets/Exceeds ASTM D2000, SAE J200, Nominal Outside Dia. 3 3/8 in, Actual Outside Dia. 3.395 in, Temp. Range -15 Degrees to 400 Degrees F
| Dash Number | 337 |
|---|---|
| System of Measurement | Inch |
| Cross Section Shape | Round |
| Cross-Section Shape | Round |
| O-Ring Material | Viton |
| O-Ring Material Compatibility | Water, Nitrogen, Silicone Grease, Mineral Oil, Vegetable Oils, Natural Gas, Lubricating Oils, Sulfuric Acid, Toluene, Propane Gas, Carbon Dioxide, Detergents, Hydraulic Oils, Fatty Acids, Gasoline, Kerosene, Diesel Oil, Hydrochloric Acid, Bleach, Animal Fats, Liquid |
| Durometer | 90A |
| Color | Black |
| Nominal Inside Dia. | 3 in |
| Actual Inside Dia. | 2.975 in |
| Nominal Outside Dia. | 3-3/8 in |
| Metal Detectable | No |
| X-Ray Dectectable | No |
| Durometer (Hardness) Rating | Very Hard |
| Item | O-Ring |
| Actual Outside Dia. | 3.395 in |
| Temp. Range | -15 Degrees to 400 Degrees F |
| X-Ray Detectable | No |
| Meets/Exceeds | ASTM D2000, SAE J200 |
| Nominal Width | 3/16 in |
| FDA Approved | Not FDA Compliant |
| Actual Width | 0.21 in |
| Type | O-Ring |
| Product Type | O-Ring |
| Material | Viton |
| Operating Temperature - Minimum | -15 deg F |
| Width - Actual | 0.21 in |
| Standards | ASTM D2000, SAE J200 |
| Operating Temperature - Maximum | 450 deg F |
| Application | Standard |
| Cross-Section Width | 3/16 in |
| Inside Diameter - Nominal | 3 in |
| Outside Diameter - Actual | 3.395 in |
| Inside Diameter - Actual | 2.975 in |
| Outside Diameter - Nominal | 3-3/8 in |
| Shell Material | Viton |
| Wire Color | Black |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 5 |