O-Ring, Not Metal Detectable Metal Detectable, Not X-Ray Detectable X-Ray Detectable, System of Measurement Inch, Cross Section Shape Round, O-Ring Material Viton, Durometer (Hardness) Rating Medium Hard, Nominal Inside Dia. 3/8 in, Nominal Width 1/16 in, Actual Inside Dia. 1.475 in, Actual Width 0.118 in, Dash Number 920, Color Black, Durometer 75A, Meets/Exceeds ASTM D2000, SAE J200, Nominal Outside Dia. 1/2 in, Actual Outside Dia. 1.711 in, Temp. Range -15 Degrees to 400 Degrees F
| Dash Number | 920 |
|---|---|
| System of Measurement | Inch |
| Cross Section Shape | Round |
| Cross-Section Shape | Round |
| O-Ring Material | Viton |
| O-Ring Material Compatibility | Water, Nitrogen, Silicone Grease, Mineral Oil, Vegetable Oils, Natural Gas, Lubricating Oils, Sulfuric Acid, Toluene, Propane Gas, Carbon Dioxide, Detergents, Hydraulic Oils, Fatty Acids, Gasoline, Kerosene, Diesel Oil, Hydrochloric Acid, Bleach, Animal Fats, Liquid |
| Durometer | 75A |
| Color | Black |
| Nominal Inside Dia. | 3/8 in |
| Actual Inside Dia. | 1.475 in |
| Nominal Outside Dia. | 1/2 in |
| FDA Approved | Not FDA Compliant |
| X-Ray Detectable | No |
| Temp. Range | -15 Degrees to 400 Degrees F |
| Actual Outside Dia. | 1.711 in |
| Nominal Width | 1/16 in |
| Meets/Exceeds | ASTM D2000, SAE J200 |
| X-Ray Dectectable | No |
| Actual Width | 0.118 in |
| Durometer (Hardness) Rating | Medium Hard |
| Item | O-Ring |
| Metal Detectable | No |
| Type | O-Ring |
| Product Type | O-Ring |
| Material | Viton |
| Operating Temperature - Maximum | 400 deg F |
| Width - Actual | 0.118 in |
| Cross-Section Width | 1/16 in |
| Inside Diameter - Actual | 1.475 in |
| Outside Diameter - Nominal | 1/2 in |
| Standards | ASTM D2000, SAE J200 |
| Inside Diameter - Nominal | 3/8 in |
| Operating Temperature - Minimum | -15 deg F |
| Outside Diameter - Actual | 1.711 in |
| Shell Material | Viton |
| Wire Color | Black |
| Country of Origin (subject to change) | China |
| Package Quantity | 25 |