O-Ring, Not Metal Detectable Metal Detectable, Not X-Ray Detectable X-Ray Detectable, System of Measurement Inch, Cross Section Shape Round, O-Ring Material Viton, Durometer (Hardness) Rating Very Hard, Nominal Inside Dia. 4 3/8 in, Nominal Width 3/16 in, Actual Inside Dia. 4.35 in, Actual Width 0.21 in, Dash Number 348, Color Black, Durometer 90A, Meets/Exceeds ASTM D2000, SAE J200, Nominal Outside Dia. 4 3/4 in, Actual Outside Dia. 4.77 in, Temp. Range -15 Degrees to 400 Degrees F
| Dash Number | 348 |
|---|---|
| System of Measurement | Inch |
| Cross Section Shape | Round |
| Cross-Section Shape | Round |
| O-Ring Material | Viton |
| O-Ring Material Compatibility | Water, Nitrogen, Silicone Grease, Mineral Oil, Vegetable Oils, Natural Gas, Lubricating Oils, Sulfuric Acid, Toluene, Propane Gas, Carbon Dioxide, Detergents, Hydraulic Oils, Fatty Acids, Gasoline, Kerosene, Diesel Oil, Hydrochloric Acid, Bleach, Animal Fats, Liquid |
| Durometer | 90A |
| Color | Black |
| Nominal Inside Dia. | 4-3/8 in |
| Actual Inside Dia. | 4.35 in |
| Nominal Outside Dia. | 4-3/4 in |
| X-Ray Detectable | No |
| X-Ray Dectectable | No |
| FDA Approved | Not FDA Compliant |
| Actual Width | 0.21 in |
| Meets/Exceeds | ASTM D2000, SAE J200 |
| Item | O-Ring |
| Temp. Range | -15 Degrees to 400 Degrees F |
| Actual Outside Dia. | 4.77 in |
| Metal Detectable | No |
| Durometer (Hardness) Rating | Very Hard |
| Nominal Width | 3/16 in |
| Type | O-Ring |
| Product Type | O-Ring |
| Material | Viton |
| Inside Diameter - Actual | 4.35 in |
| Width - Actual | 0.21 in |
| Operating Temperature - Maximum | 450 deg F |
| Inside Diameter - Nominal | 4-3/8 in |
| Operating Temperature - Minimum | -15 deg F |
| Outside Diameter - Nominal | 4-3/4 in |
| Outside Diameter - Actual | 4.77 in |
| Cross-Section Width | 3/16 in |
| Application | Standard |
| Standards | ASTM D2000, SAE J200 |
| Shell Material | Viton |
| Wire Color | Black |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 2 |