O-Ring, Not Metal Detectable Metal Detectable, Not X-Ray Detectable X-Ray Detectable, System of Measurement Inch, Cross Section Shape Round, O-Ring Material Viton, Durometer (Hardness) Rating Medium Hard, Nominal Inside Dia. 4 5/8 in, Nominal Width 1/4 in, Actual Inside Dia. 4.6 in, Actual Width 0.275 in, Dash Number 426, Color Black, Durometer 75A, Meets/Exceeds ASTM D2000, SAE J200, Nominal Outside Dia. 5 1/8 in, Actual Outside Dia. 5.15 in, Temp. Range -15 Degrees to 400 Degrees F
| Dash Number | 426 |
|---|---|
| System of Measurement | Inch |
| Cross Section Shape | Round |
| Cross-Section Shape | Round |
| O-Ring Material | Viton |
| O-Ring Material Compatibility | Water, Nitrogen, Silicone Grease, Mineral Oil, Vegetable Oils, Natural Gas, Lubricating Oils, Sulfuric Acid, Toluene, Propane Gas, Carbon Dioxide, Detergents, Hydraulic Oils, Fatty Acids, Gasoline, Kerosene, Diesel Oil, Hydrochloric Acid, Bleach, Animal Fats, Liquid |
| Durometer | 75A |
| Color | Black |
| Nominal Inside Dia. | 4-5/8 in |
| Actual Inside Dia. | 4.6 in |
| Nominal Outside Dia. | 5-1/8 in |
| Temp. Range | -15 Degrees to 400 Degrees F |
| Durometer (Hardness) Rating | Medium Hard |
| Meets/Exceeds | ASTM D2000, SAE J200 |
| Actual Width | 0.275 in |
| X-Ray Detectable | No |
| X-Ray Dectectable | No |
| Item | O-Ring |
| Nominal Width | 1/4 in |
| FDA Approved | Not FDA Compliant |
| Actual Outside Dia. | 5.15 in |
| Metal Detectable | No |
| Type | O-Ring |
| Product Type | O-Ring |
| Material | Viton |
| Operating Temperature - Minimum | -15 deg F |
| Width - Actual | 0.275 in |
| Inside Diameter - Nominal | 4-5/8 in |
| Outside Diameter - Actual | 5.15 in |
| Standards | ASTM D2000, SAE J200 |
| Cross-Section Width | 1/4 in |
| Inside Diameter - Actual | 4.6 in |
| Application | Standard |
| Operating Temperature - Maximum | 450 deg F |
| Outside Diameter - Nominal | 5-1/8 in |
| Shell Material | Viton |
| Wire Color | Black |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 2 |