O-Ring, Not Metal Detectable Metal Detectable, Not X-Ray Detectable X-Ray Detectable, System of Measurement Inch, Cross Section Shape Round, O-Ring Material Viton, Durometer (Hardness) Rating Very Hard, Nominal Inside Dia. 4 7/8 in, Nominal Width 3/16 in, Actual Inside Dia. 4.85 in, Actual Width 0.21 in, Dash Number 352, Color Black, Durometer 90A, Meets/Exceeds ASTM D2000, SAE J200, Nominal Outside Dia. 5 1/4 in, Actual Outside Dia. 5.27 in, Temp. Range -15 Degrees to 400 Degrees F
| Dash Number | 352 |
|---|---|
| System of Measurement | Inch |
| Cross Section Shape | Round |
| Cross-Section Shape | Round |
| O-Ring Material | Viton |
| O-Ring Material Compatibility | Water, Nitrogen, Silicone Grease, Mineral Oil, Vegetable Oils, Natural Gas, Lubricating Oils, Sulfuric Acid, Toluene, Propane Gas, Carbon Dioxide, Detergents, Hydraulic Oils, Fatty Acids, Gasoline, Kerosene, Diesel Oil, Hydrochloric Acid, Bleach, Animal Fats, Liquid |
| Durometer | 90A |
| Color | Black |
| Nominal Inside Dia. | 4-7/8 in |
| Actual Inside Dia. | 4.85 in |
| Nominal Outside Dia. | 5-1/4 in |
| X-Ray Dectectable | No |
| Durometer (Hardness) Rating | Very Hard |
| FDA Approved | Not FDA Compliant |
| Metal Detectable | No |
| Meets/Exceeds | ASTM D2000, SAE J200 |
| Actual Width | 0.21 in |
| Item | O-Ring |
| Actual Outside Dia. | 5.27 in |
| X-Ray Detectable | No |
| Nominal Width | 3/16 in |
| Temp. Range | -15 Degrees to 400 Degrees F |
| Type | O-Ring |
| Product Type | O-Ring |
| Material | Viton |
| Outside Diameter - Nominal | 5-1/4 in |
| Inside Diameter - Nominal | 4-7/8 in |
| Outside Diameter - Actual | 5.27 in |
| Standards | ASTM D2000, SAE J200 |
| Inside Diameter - Actual | 4.85 in |
| Operating Temperature - Maximum | 450 deg F |
| Operating Temperature - Minimum | -15 deg F |
| Application | Standard |
| Cross-Section Width | 3/16 in |
| Width - Actual | 0.21 in |
| Shell Material | Viton |
| Wire Color | Black |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 2 |