O-Ring, Not Metal Detectable Metal Detectable, Not X-Ray Detectable X-Ray Detectable, System of Measurement Inch, Cross Section Shape Round, O-Ring Material Viton, Durometer (Hardness) Rating Medium Hard, Nominal Inside Dia. 5 1/2 in, Nominal Width 3/16 in, Actual Inside Dia. 5.475 in, Actual Width 0.21 in, Dash Number 357, Color Black, Durometer 75A, Meets/Exceeds ASTM D2000, SAE J200, Nominal Outside Dia. 5 7/8 in, Actual Outside Dia. 5.895 in, Temp. Range -15 Degrees to 400 Degrees F
| Dash Number | 357 |
|---|---|
| System of Measurement | Inch |
| Cross Section Shape | Round |
| Cross-Section Shape | Round |
| O-Ring Material | Viton |
| O-Ring Material Compatibility | Water, Nitrogen, Silicone Grease, Mineral Oil, Vegetable Oils, Natural Gas, Lubricating Oils, Sulfuric Acid, Toluene, Propane Gas, Carbon Dioxide, Detergents, Hydraulic Oils, Fatty Acids, Gasoline, Kerosene, Diesel Oil, Hydrochloric Acid, Bleach, Animal Fats, Liquid |
| Durometer | 75A |
| Color | Black |
| Nominal Inside Dia. | 5-1/2 in |
| Actual Inside Dia. | 5.475 in |
| Nominal Outside Dia. | 5-7/8 in |
| X-Ray Detectable | No |
| FDA Approved | Not FDA Compliant |
| Metal Detectable | No |
| Actual Width | 0.21 in |
| Actual Outside Dia. | 5.895 in |
| Item | O-Ring |
| Nominal Width | 3/16 in |
| Temp. Range | -15 Degrees to 400 Degrees F |
| Durometer (Hardness) Rating | Medium Hard |
| Meets/Exceeds | ASTM D2000, SAE J200 |
| X-Ray Dectectable | No |
| Type | O-Ring |
| Product Type | O-Ring |
| Material | Viton |
| Operating Temperature - Minimum | -15 deg F |
| Outside Diameter - Actual | 5.895 in |
| Standards | ASTM D2000, SAE J200 |
| Width - Actual | 0.21 in |
| Cross-Section Width | 3/16 in |
| Outside Diameter - Nominal | 5-7/8 in |
| Application | Standard |
| Operating Temperature - Maximum | 450 deg F |
| Inside Diameter - Nominal | 5-1/2 in |
| Inside Diameter - Actual | 5.475 in |
| Shell Material | Viton |
| Wire Color | Black |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 2 |