O-Ring, Not Metal Detectable Metal Detectable, Not X-Ray Detectable X-Ray Detectable, System of Measurement Inch, Cross Section Shape Round, O-Ring Material Viton, Durometer (Hardness) Rating Very Hard, Nominal Inside Dia. 5 1/8 in, Nominal Width 1/4 in, Actual Inside Dia. 5.1 in, Actual Width 0.275 in, Dash Number 430, Color Black, Durometer 90A, Meets/Exceeds ASTM D2000, SAE J200, Nominal Outside Dia. 5 5/8 in, Actual Outside Dia. 5.65 in, Temp. Range -15 Degrees to 400 Degrees F
| Dash Number | 430 |
|---|---|
| System of Measurement | Inch |
| Cross Section Shape | Round |
| Cross-Section Shape | Round |
| O-Ring Material | Viton |
| O-Ring Material Compatibility | Water, Nitrogen, Silicone Grease, Mineral Oil, Vegetable Oils, Natural Gas, Lubricating Oils, Sulfuric Acid, Toluene, Propane Gas, Carbon Dioxide, Detergents, Hydraulic Oils, Fatty Acids, Gasoline, Kerosene, Diesel Oil, Hydrochloric Acid, Bleach, Animal Fats, Liquid |
| Durometer | 90A |
| Color | Black |
| Nominal Inside Dia. | 5-1/8 in |
| Actual Inside Dia. | 5.1 in |
| Nominal Outside Dia. | 5-5/8 in |
| Actual Width | 0.275 in |
| FDA Approved | Not FDA Compliant |
| Meets/Exceeds | ASTM D2000, SAE J200 |
| X-Ray Detectable | No |
| Nominal Width | 1/4 in |
| Temp. Range | -15 Degrees to 400 Degrees F |
| X-Ray Dectectable | No |
| Durometer (Hardness) Rating | Very Hard |
| Actual Outside Dia. | 5.65 in |
| Item | O-Ring |
| Metal Detectable | No |
| Type | O-Ring |
| Product Type | O-Ring |
| Material | Viton |
| Operating Temperature - Minimum | -15 deg F |
| Cross-Section Width | 1/4 in |
| Application | Standard |
| Standards | ASTM D2000, SAE J200 |
| Operating Temperature - Maximum | 450 deg F |
| Inside Diameter - Actual | 5.1 in |
| Outside Diameter - Nominal | 5-5/8 in |
| Outside Diameter - Actual | 5.65 in |
| Width - Actual | 0.275 in |
| Inside Diameter - Nominal | 5-1/8 in |
| Shell Material | Viton |
| Wire Color | Black |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 2 |