O-Ring, Not Metal Detectable Metal Detectable, Not X-Ray Detectable X-Ray Detectable, System of Measurement Inch, Cross Section Shape Round, O-Ring Material PTFE, Durometer (Hardness) Rating Very Hard, Nominal Inside Dia. 5/8 in, Nominal Width 1/8 in, Actual Inside Dia. 0.609 in, Actual Width 0.139 in, Dash Number 208, Color White, Durometer 55D, Nominal Outside Dia. 7/8 in, Actual Outside Dia. 0.887 in, Temp. Range -300 Degrees to 500 Degrees F, FDA Approved FDA Approved, Package Quantity 10
| Dash Number | 208 |
|---|---|
| System of Measurement | Inch |
| Cross Section Shape | Round |
| Cross-Section Shape | Round |
| O-Ring Material | PTFE |
| O-Ring Material Compatibility | Water, Carbon Dioxide, Nitrogen, Detergents, Silicone Grease, Hydraulic Oils, Mineral Oil, Vegetable Oils, Natural Gas, Fatty Acids, Gasoline, Lubricating Oils, Kerosene, Diesel Oil, Hydrochloric Acid, Ethanol, Methanol, Bleach, Toluene, Animal Fats, Liquid, Propane Gas, Acids, Sulfuric, Steam, Acetone, Ammonia, Anhydrous |
| Durometer | 55D |
| Color | White |
| Nominal Inside Dia. | 5/8 in |
| Actual Inside Dia. | 0.609 in |
| Nominal Outside Dia. | 7/8 in |
| Actual Outside Dia. | 0.887 in |
| Metal Detectable | No |
| FDA Approved | FDA Compliant |
| Actual Width | 0.139 in |
| Item | O-Ring |
| Temp. Range | -300 Degrees to 500 Degrees F |
| Durometer (Hardness) Rating | Very Hard |
| X-Ray Detectable | No |
| Nominal Width | 1/8 in |
| X-Ray Dectectable | No |
| Type | O-Ring |
| Product Type | O-Ring |
| Material | PTFE |
| Inside Diameter - Nominal | 5/8 in |
| Inside Diameter - Actual | 0.609 in |
| Width - Actual | 0.139 in |
| Outside Diameter - Nominal | 7/8 in |
| Outside Diameter - Actual | 0.887 in |
| Cross-Section Width | 1/8 in |
| Operating Temperature - Maximum | 500 deg F |
| Operating Temperature - Minimum | -300 deg F |
| Shell Material | PTFE |
| Wire Color | White |
| Country of Origin (subject to change) | Italy |
| Package Quantity | 10 |