O-Ring, Not Metal Detectable Metal Detectable, Not X-Ray Detectable X-Ray Detectable, System of Measurement Inch, Cross Section Shape Round, O-Ring Material Viton, Durometer (Hardness) Rating Very Hard, Nominal Inside Dia. 6 1/2 in, Nominal Width 3/16 in, Actual Inside Dia. 6.475 in, Actual Width 0.21 in, Dash Number 363, Color Black, Durometer 90A, Meets/Exceeds ASTM D2000, SAE J200, Nominal Outside Dia. 6 7/8 in, Actual Outside Dia. 6.895 in, Temp. Range -15 Degrees to 400 Degrees F
| Dash Number | 363 |
|---|---|
| System of Measurement | Inch |
| Cross Section Shape | Round |
| Cross-Section Shape | Round |
| O-Ring Material | Viton |
| O-Ring Material Compatibility | Water, Nitrogen, Silicone Grease, Mineral Oil, Vegetable Oils, Natural Gas, Lubricating Oils, Sulfuric Acid, Toluene, Propane Gas, Carbon Dioxide, Detergents, Hydraulic Oils, Fatty Acids, Gasoline, Kerosene, Diesel Oil, Hydrochloric Acid, Bleach, Animal Fats, Liquid |
| Durometer | 90A |
| Color | Black |
| Nominal Inside Dia. | 6-1/2 in |
| Actual Inside Dia. | 6.475 in |
| Nominal Outside Dia. | 6-7/8 in |
| Actual Width | 0.21 in |
| X-Ray Detectable | No |
| Temp. Range | -15 Degrees to 400 Degrees F |
| Metal Detectable | No |
| FDA Approved | Not FDA Compliant |
| Actual Outside Dia. | 6.895 in |
| Nominal Width | 3/16 in |
| Item | O-Ring |
| Durometer (Hardness) Rating | Very Hard |
| Meets/Exceeds | ASTM D2000, SAE J200 |
| X-Ray Dectectable | No |
| Type | O-Ring |
| Product Type | O-Ring |
| Material | Viton |
| Application | Standard |
| Cross-Section Width | 3/16 in |
| Inside Diameter - Actual | 6.475 in |
| Width - Actual | 0.21 in |
| Outside Diameter - Nominal | 6-7/8 in |
| Outside Diameter - Actual | 6.895 in |
| Operating Temperature - Maximum | 450 deg F |
| Operating Temperature - Minimum | -15 deg F |
| Standards | ASTM D2000, SAE J200 |
| Inside Diameter - Nominal | 6-1/2 in |
| Shell Material | Viton |
| Wire Color | Black |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 2 |