O-Ring, Not Metal Detectable Metal Detectable, Not X-Ray Detectable X-Ray Detectable, System of Measurement Inch, Cross Section Shape Round, O-Ring Material Viton, Durometer (Hardness) Rating Medium Hard, Nominal Inside Dia. 7 1/2 in, Nominal Width 1/4 in, Actual Inside Dia. 7.475 in, Actual Width 0.275 in, Dash Number 443, Color Black, Durometer 75A, Meets/Exceeds ASTM D2000, SAE J200, Nominal Outside Dia. 8 in, Actual Outside Dia. 8.025 in, Temp. Range -15 Degrees to 400 Degrees F
| Dash Number | 443 |
|---|---|
| System of Measurement | Inch |
| Cross Section Shape | Round |
| Cross-Section Shape | Round |
| O-Ring Material | Viton |
| O-Ring Material Compatibility | Water, Nitrogen, Silicone Grease, Mineral Oil, Vegetable Oils, Natural Gas, Lubricating Oils, Sulfuric Acid, Toluene, Propane Gas, Carbon Dioxide, Detergents, Hydraulic Oils, Fatty Acids, Gasoline, Kerosene, Diesel Oil, Hydrochloric Acid, Bleach, Animal Fats, Liquid |
| Durometer | 75A |
| Color | Black |
| Nominal Inside Dia. | 7-1/2 in |
| Actual Inside Dia. | 7.475 in |
| Nominal Outside Dia. | 8 in |
| X-Ray Detectable | No |
| Meets/Exceeds | ASTM D2000, SAE J200 |
| Actual Width | 0.275 in |
| Metal Detectable | No |
| Actual Outside Dia. | 8.025 in |
| Item | O-Ring |
| Nominal Width | 1/4 in |
| Temp. Range | -15 Degrees to 400 Degrees F |
| X-Ray Dectectable | No |
| FDA Approved | Not FDA Compliant |
| Durometer (Hardness) Rating | Medium Hard |
| Type | O-Ring |
| Product Type | O-Ring |
| Material | Viton |
| Application | Standard |
| Cross-Section Width | 1/4 in |
| Outside Diameter - Actual | 8.025 in |
| Width - Actual | 0.275 in |
| Inside Diameter - Nominal | 7-1/2 in |
| Inside Diameter - Actual | 7.475 in |
| Standards | ASTM D2000, SAE J200 |
| Operating Temperature - Maximum | 450 deg F |
| Operating Temperature - Minimum | -15 deg F |
| Outside Diameter - Nominal | 8 in |
| Shell Material | Viton |
| Wire Color | Black |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 2 |