O-Ring, Not Metal Detectable Metal Detectable, Not X-Ray Detectable X-Ray Detectable, System of Measurement Inch, Cross Section Shape Round, O-Ring Material Viton, Durometer (Hardness) Rating Very Hard, Nominal Inside Dia. 7 3/4 in, Nominal Width 3/16 in, Actual Inside Dia. 7.725 in, Actual Width 0.21 in, Dash Number 368, Color Black, Durometer 90A, Meets/Exceeds ASTM D2000, SAE J200, Nominal Outside Dia. 8 1/8 in, Actual Outside Dia. 8.145 in, Temp. Range -15 Degrees to 400 Degrees F
| Dash Number | 368 |
|---|---|
| System of Measurement | Inch |
| Cross Section Shape | Round |
| Cross-Section Shape | Round |
| O-Ring Material | Viton |
| O-Ring Material Compatibility | Water, Nitrogen, Silicone Grease, Mineral Oil, Vegetable Oils, Natural Gas, Lubricating Oils, Sulfuric Acid, Toluene, Propane Gas, Carbon Dioxide, Detergents, Hydraulic Oils, Fatty Acids, Gasoline, Kerosene, Diesel Oil, Hydrochloric Acid, Bleach, Animal Fats, Liquid |
| Durometer | 90A |
| Color | Black |
| Nominal Inside Dia. | 7-3/4 in |
| Actual Inside Dia. | 7.725 in |
| Nominal Outside Dia. | 8-1/8 in |
| Meets/Exceeds | ASTM D2000, SAE J200 |
| X-Ray Detectable | No |
| Temp. Range | -15 Degrees to 400 Degrees F |
| Durometer (Hardness) Rating | Very Hard |
| FDA Approved | Not FDA Compliant |
| X-Ray Dectectable | No |
| Nominal Width | 3/16 in |
| Item | O-Ring |
| Metal Detectable | No |
| Actual Width | 0.21 in |
| Actual Outside Dia. | 8.145 in |
| Type | O-Ring |
| Product Type | O-Ring |
| Material | Viton |
| Cross-Section Width | 3/16 in |
| Width - Actual | 0.21 in |
| Application | Standard |
| Inside Diameter - Actual | 7.725 in |
| Standards | ASTM D2000, SAE J200 |
| Operating Temperature - Minimum | -15 deg F |
| Inside Diameter - Nominal | 7-3/4 in |
| Outside Diameter - Actual | 8.145 in |
| Outside Diameter - Nominal | 8-1/8 in |
| Operating Temperature - Maximum | 450 deg F |
| Shell Material | Viton |
| Wire Color | Black |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 2 |