O-Ring, Not Metal Detectable Metal Detectable, Not X-Ray Detectable X-Ray Detectable, System of Measurement Inch, Cross Section Shape Round, O-Ring Material Viton, Durometer (Hardness) Rating Very Hard, Nominal Inside Dia. 7/32 in, Nominal Width 3/32 in, Actual Inside Dia. 0.206 in, Actual Width 0.103 in, Dash Number 107, Color Black, Durometer 90A, Meets/Exceeds ASTM D2000, SAE J200, Nominal Outside Dia. 13/32 in, Actual Outside Dia. 0.412 in, Temp. Range -15 Degrees to 400 Degrees F
| Dash Number | 107 |
|---|---|
| System of Measurement | Inch |
| Cross Section Shape | Round |
| Cross-Section Shape | Round |
| O-Ring Material | Viton |
| O-Ring Material Compatibility | Water, Nitrogen, Silicone Grease, Mineral Oil, Vegetable Oils, Natural Gas, Lubricating Oils, Sulfuric Acid, Toluene, Propane Gas, Carbon Dioxide, Detergents, Hydraulic Oils, Fatty Acids, Gasoline, Kerosene, Diesel Oil, Hydrochloric Acid, Bleach, Animal Fats, Liquid |
| Durometer | 90A |
| Color | Black |
| Nominal Inside Dia. | 7/32 in |
| Actual Inside Dia. | 0.206 in |
| Nominal Outside Dia. | 13/32 in |
| Temp. Range | -15 Degrees to 400 Degrees F |
| Meets/Exceeds | ASTM D2000, SAE J200 |
| Actual Outside Dia. | 0.412 in |
| Item | O-Ring |
| X-Ray Dectectable | No |
| Metal Detectable | No |
| Nominal Width | 3/32 in |
| FDA Approved | Not FDA Compliant |
| X-Ray Detectable | No |
| Durometer (Hardness) Rating | Very Hard |
| Actual Width | 0.103 in |
| Type | O-Ring |
| Product Type | O-Ring |
| Material | Viton |
| Width - Actual | 0.103 in |
| Cross-Section Width | 3/32 in |
| Application | Standard |
| Operating Temperature - Maximum | 450 deg F |
| Inside Diameter - Actual | 0.206 in |
| Operating Temperature - Minimum | -15 deg F |
| Inside Diameter - Nominal | 7/32 in |
| Outside Diameter - Nominal | 13/32 in |
| Standards | ASTM D2000, SAE J200 |
| Outside Diameter - Actual | 0.412 in |
| Shell Material | Viton |
| Wire Color | Black |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 50 |