O-Ring, Not Metal Detectable Metal Detectable, Not X-Ray Detectable X-Ray Detectable, System of Measurement Inch, Cross Section Shape Round, O-Ring Material PTFE, Durometer (Hardness) Rating Very Hard, Nominal Inside Dia. 7/8 in, Nominal Width 1/16 in, Actual Inside Dia. 0.864 in, Actual Width 0.07 in, Dash Number 020, Color White, Durometer 55D, Nominal Outside Dia. 1 in, Actual Outside Dia. 1.004 in, Temp. Range -300 Degrees to 500 Degrees F, FDA Approved FDA Compliant, Package Quantity 10
| Dash Number | 020 |
|---|---|
| System of Measurement | Inch |
| Cross Section Shape | Round |
| Cross-Section Shape | Round |
| O-Ring Material | PTFE |
| O-Ring Material Compatibility | Water, Carbon Dioxide, Nitrogen, Detergents, Silicone Grease, Hydraulic Oils, Mineral Oil, Vegetable Oils, Natural Gas, Fatty Acids, Gasoline, Lubricating Oils, Kerosene, Diesel Oil, Hydrochloric Acid, Ethanol, Methanol, Bleach, Toluene, Animal Fats, Liquid, Propane Gas, Acids, Sulfuric, Steam, Acetone, Ammonia, Anhydrous |
| Durometer | 55D |
| Color | White |
| Nominal Inside Dia. | 7/8 in |
| Actual Inside Dia. | 0.864 in |
| Nominal Outside Dia. | 1 in |
| Item | O-Ring |
| FDA Approved | FDA Compliant |
| Durometer (Hardness) Rating | Very Hard |
| Actual Outside Dia. | 1.004 in |
| X-Ray Dectectable | No |
| Temp. Range | -300 Degrees to 500 Degrees F |
| Nominal Width | 1/16 in |
| Metal Detectable | No |
| Actual Width | 0.07 in |
| X-Ray Detectable | No |
| Type | O-Ring |
| Product Type | O-Ring |
| Material | PTFE |
| Inside Diameter - Actual | 0.864 in |
| Cross-Section Width | 1/16 in |
| Outside Diameter - Actual | 1.004 in |
| Operating Temperature - Maximum | 500 deg F |
| Inside Diameter - Nominal | 7/8 in |
| Width - Actual | 0.07 in |
| Outside Diameter - Nominal | 1 in |
| Operating Temperature - Minimum | -300 deg F |
| Shell Material | PTFE |
| Wire Color | White |
| Country of Origin (subject to change) | Italy |
| Package Quantity | 10 |