O-Ring, Not Metal Detectable Metal Detectable, Not X-Ray Detectable X-Ray Detectable, System of Measurement Inch, Cross Section Shape Round, O-Ring Material Viton, Durometer (Hardness) Rating Very Hard, Nominal Inside Dia. 8 1/2 in, Nominal Width 1/4 in, Actual Inside Dia. 8.475 in, Actual Width 0.275 in, Dash Number 446, Color Black, Durometer 90A, Meets/Exceeds ASTM D2000, SAE J200, Nominal Outside Dia. 9 in, Actual Outside Dia. 9.025 in, Temp. Range -15 Degrees to 400 Degrees F
| Dash Number | 446 |
|---|---|
| System of Measurement | Inch |
| Cross Section Shape | Round |
| Cross-Section Shape | Round |
| O-Ring Material | Viton |
| O-Ring Material Compatibility | Water, Nitrogen, Silicone Grease, Mineral Oil, Vegetable Oils, Natural Gas, Lubricating Oils, Sulfuric Acid, Toluene, Propane Gas, Carbon Dioxide, Detergents, Hydraulic Oils, Fatty Acids, Gasoline, Kerosene, Diesel Oil, Hydrochloric Acid, Bleach, Animal Fats, Liquid |
| Durometer | 90A |
| Color | Black |
| Nominal Inside Dia. | 8-1/2 in |
| Actual Inside Dia. | 8.475 in |
| Nominal Outside Dia. | 9 in |
| X-Ray Detectable | No |
| FDA Approved | Not FDA Compliant |
| Item | O-Ring |
| Metal Detectable | No |
| Meets/Exceeds | ASTM D2000, SAE J200 |
| Temp. Range | -15 Degrees to 400 Degrees F |
| Actual Width | 0.275 in |
| Actual Outside Dia. | 9.025 in |
| Nominal Width | 1/4 in |
| X-Ray Dectectable | No |
| Durometer (Hardness) Rating | Very Hard |
| Type | O-Ring |
| Product Type | O-Ring |
| Material | Viton |
| Inside Diameter - Nominal | 8-1/2 in |
| Inside Diameter - Actual | 8.475 in |
| Operating Temperature - Maximum | 450 deg F |
| Cross-Section Width | 1/4 in |
| Application | Standard |
| Width - Actual | 0.275 in |
| Outside Diameter - Nominal | 9 in |
| Standards | ASTM D2000, SAE J200 |
| Outside Diameter - Actual | 9.025 in |
| Operating Temperature - Minimum | -15 deg F |
| Shell Material | Viton |
| Wire Color | Black |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 2 |