O-Ring, Not Metal Detectable Metal Detectable, Not X-Ray Detectable X-Ray Detectable, System of Measurement Inch, Cross Section Shape Round, O-Ring Material FEP with Silicone Core, Durometer (Hardness) Rating Hard, Nominal Inside Dia. 2 in, Nominal Width 3/16 in, Actual Inside Dia. 1.975 in, Actual Width 0.21 in, Dash Number 329, Color Clear with Red Core, Durometer 85A, Meets/Exceeds ASTM D2116, Nominal Outside Dia. 2 3/8 in, Actual Outside Dia. 2.395 in
| Dash Number | 329 |
|---|---|
| System of Measurement | Inch |
| Cross Section Shape | Round |
| Cross-Section Shape | Round |
| O-Ring Material | FEP with Silicone Core |
| O-Ring Material Compatibility | Water, Carbon Dioxide, Nitrogen, Detergents, Silicone Grease, Hydraulic Oils, Mineral Oil, Vegetable Oils, Natural Gas, Fatty Acids, Gasoline, Lubricating Oils, Kerosene, Diesel Oil, Hydrochloric Acid, Ethanol, Methanol, Bleach, Toluene, Animal Fats, Liquid, Propane Gas, Acids, Sulfuric, Steam, Acetone, Ammonia, Anhydrous |
| Durometer | 85A |
| Color | Clear with Red Core |
| Nominal Inside Dia. | 2 in |
| Actual Inside Dia. | 1.975 in |
| Nominal Outside Dia. | 2-3/8 in |
| Item | O-Ring |
| Temp. Range | -75 Degrees to 400 Degrees F |
| Meets/Exceeds | ASTM D2116 |
| FDA Approved | FDA Compliant |
| Actual Outside Dia. | 2.395 in |
| Metal Detectable | No |
| Durometer (Hardness) Rating | Hard |
| Nominal Width | 3/16 in |
| Actual Width | 0.21 in |
| X-Ray Dectectable | No |
| X-Ray Detectable | No |
| Type | O-Ring |
| Product Type | O-Ring |
| Material | FEP Core |
| Standards | ASTM D2116 |
| Cross-Section Width | 3/16 in |
| Inside Diameter - Actual | 1.975 in |
| Operating Temperature - Maximum | 400 deg F |
| Width - Actual | 0.21 in |
| Outside Diameter - Nominal | 2-3/8 in |
| Outside Diameter - Actual | 2.395 in |
| Inside Diameter - Nominal | 2 in |
| Operating Temperature - Minimum | -75 deg F |
| Shell Material | FEP Core |
| Wire Color | Clear with Red Core |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |