HDPE Sheet, HDPE, Grade Standard, Plastic Length 4 ft, Plastic Width 12 in, Plastic Thickness 0.75 in, Off-White, Plastic Clarity Opaque, Tensile Strength 4,600 psi, Impact Strength 1.94 ft-lb/in, Friction Coefficient 0.2, Water Absorption 0.01 Percent, Temperature Range 0 Degrees to 194 Degrees F, Plastic Density 0.93 g/cc, Plastic Hardness 70D
| Item | Sheet Stock |
|---|---|
| Plastic Material | HDPE |
| Plastic Thickness | 3/4 in |
| Plastic Width | 12 in |
| Plastic Length | 48 in |
| Plastic Color | Off-White |
| Max. Temp. (F) | 194 |
| Min. Temp. (F) | 0 Degrees F |
| Color | Off-White |
| Width Tolerance | +/-0.25 in |
| Operating Temp. Range | 0 to 194 deg F |
| Plastic Grouping | Sheet Stock |
| Standards | ASTM D2239, Dept of Canadian Agriculture, FDA, USDA |
| Thickness Tolerance | +/-10% |
| Material Color Family | Off-White |
| Material Type | Food Grade |
| Plastic Properties | Chemical/Corrosion Resistant, FDA Approved, Non-Friction Surface, Moisture Resistant, Wear Material |
| Tensile Strength | 4,600 psi |
| Impact Strength | 1.94 ft-lb/in |
| Length Tolerance | +/-0.250 in |
| Width | 12" |
| Length | 48" |
| Thickness | 3/4 in |
| Material | HDPE |
| Grade | Standard |
| Plastic Hardness | 70D |
| UV Resistant | No |
| Plastic Width Tolerance | +/-1/4 in |
| Impact Strength Rating | Poor |
| Minimum Temperature | -40 deg F |
| Friction Rating | Very Slippery |
| Plastic Hardness Rating | Medium |
| Machinability | 80 % |
| Corrosion and Chemical Resistance | Good |
| Plastic Thickness Tolerance | +/-10% |
| Shape | Rectangle |
| Plastic Length Tolerance | +/-1/4 in |
| Maximum Temperature | 180 deg F |
| Temperature Range | 0 to 194 deg F |
| Friction Coefficient | 0.2 |
| Plastic Clarity | Opaque |
| Wear Factor | Good |
| Tensile Strength Rating | Poor |
| Water Absorption | 0.01% |
| Water Absorption Rating | Excellent |
| Nominal Size | 12 in W x 48 in L |
| Maximum Adhesive Temperature | 203 deg F |
| Plastic Density | 0.93 g/cc |
| Minimum Adhesive Temperature | 70 deg F |
| Backing Type | Not Applicable |
| UL 752 Ballistic Rating | Not Applicable |
| Wear Rate | 6.53 x 10^-6 cu mm/N-m |
| Product Form | Sheet |
| Scratch-Resistant | Scratch-Resistant |
| Filler Material | Not Applicable |
| Flexural Modulus | 174 ksi |
| Fabrication | Extruded |
| Static-Resistant | Not Static-Resistant |
| Coefficient of Thermal Expansion | 0.55 x 10^-5 in/in/ Degrees F |
| Light Transmission | 90 % |
| Shore Hardness | 70 Shore D |
| Metal Detectable | No |
| UV-Resistant | UV-Resistant |
| Elongation | 300 % |
| Dielectric Strength | 50 kV/mm |
| Product Type | Plastic Sheet |
| Number of Walls | Not Applicable |
| Rockwell Hardness | 64 HRM |
| FDA Compliance | 21 CFR 177.1520 |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |